“The new tariffs that have hit our industry (and so many others) will be difficult to navigate. Not because they will hurt our business but because they hurt the American consumer. If the US were more manufacturing friendly I think most bike companies would be happy to manufacture here. However it is very expensive to manufacture in the US and overseas manufacturing is the only real way to offer the American consumer potentially life changing products.”
For many bikes, battery range is more important that total power (because they're all pretty powerful). You want a bike that delivers a range long enough for your rides at the power levels you want. Most e-bikes will have three to five levels of assist kicking in anywhere from 25 percent of you pedal power to 200 percent boost. Consider how fast the battery takes to recharge, especially if you'll be using your bike for long commutes.
The Moterra is Cannondale’s biggest and baddest e-mtb and just looking at this thing you can see that it’s built to withstand some wicked downhills and big drops. With 130mm of front and rear travel, paired up with 27.5-inch wheels and trail-grabbing 2.8-inch tires, along with a KS LEV Integra Dropper Post make this pedal-assist mountain bike a great option if you want to climb farther to shred longer, but don’t want to lug your bike uphill for ages. The 250w motor, placed slightly farther forward than most other bikes to optimize weight distribution and handling, will give you a nice boost so you can enjoy the ride up and not be too gassed when you get to the top. After all, it’s all about the ride down, right?
The Nuvinci hub system is the best geared hub that I have ever used. There is literally no maintenance to be done on this drivetrain. I’d recommend buying it with the Gates Carbon belt because you’ll never run into issues like the chain falling off. You operate the Nuvinci system with a grip shifter and can of course shift even when you’re not moving.
Both land management regulators and mountain bike trail access advocates have argued for bans of electric bicycles on outdoor trails that are accessible to mountain bikes, citing potential safety hazards as well as the potential for electric bikes to damage trails. A study conducted by the International Mountain Bicycling Association, however, found that the physical impacts of low-powered pedal-assist electric mountain bikes may be similar to traditional mountain bikes.[68]
IZIP has been manufacturing high-end, affordable electric bikes since 2005. We think the IZIP E3 Dash is the best of the bunch. This class 3 pedelec delivers power as you pedal taking you to speeds of 28 mph. It's fantastic for your commute, especially if you have hills to climb. The mid-mounted motor configuartion maximizes torque to get you up inclines.
Older Americans, especially those 65+ are the real drivers of electric bike adoption in the United States. Betty and Grady Smith of Beaumont Texas may not know it but they are the driving demographic for electric bicycles and  tricycles. Both in thier eighties, the couple enjoys riding thier Worksman electric side-by-side tricycle around town. As a business offering electric bike and trike conversion systems since 2008, we've gotten to know...
Though aside from the extra battery and abundance of included accessories, Riese and Muller’s use of a Gate’s belt drive means no shifting of gears, no greasy maintenance, and much higher durability. If you have the money to spend, Riese and Muller’s Delite nuvinci is one of the best on the market and an ebike we just couldn’t get enough of during our own tests.
The Benno e-Joy promises to be as fun to play with as it is to look at. Benno says it took inspiration from the timeless style of vintage Italian scooters and classic German cars. Add in the functionality of front and rear cargo racks and the 250w pedal-assist motor and you have a beautiful bike that's ready for anything. Cruise into town for groceries, wander comfortably along a gravel path on 2.35-inch balloon tires, or add the child seat attachment and take your kid along for the ride, and beach-goers will appreciate the surfboard rack. Whatever your cycling pleasure pursuit may be, the e-Joy can be your ticket to fun.
The Focus comes with lots of extras: front and rear lights, bell, fenders, chain guard and rack. The Panasonic drive system that powers it is the same unit that was on the Kalkhoff bike that climbed to the top of the Pikes Peak bicycle race, one of only 3 types of bikes to survive this 8000 foot 20-mile climb in 2012. The Panasonic drive system is a well built piece of E-bike engineering which drives the bottom bracket and powers the rear wheel through the same drive chain as the rider. It is only available on OEM bikes which have been-purpose built using it. It stands as one of the most refined mid-drive systems ever built.
So instead of giving US companies breathing room to manufacture their own e-bikes, the tariffs are largely just hurting the US electric bicycle industry by preventing it from importing and selling affordable e-bikes, without solving the underlying reasons causing US e-bike companies to choose not to manufacture their e-bikes in the US in the first place.
Controllers for brushless motors: E-bikes require high initial torque and therefore models that use brushless motors typically have Hall sensor commutation for speed and angle measurement. An electronic controller provides assistance as a function of the sensor inputs, the vehicle speed and the required force. The controllers generally allow input by means of potentiometer or Hall Effect twist grip (or thumb-operated lever throttle), closed-loop speed control for precise speed regulation, protection logic for over-voltage, over-current and thermal protection. Bikes with a pedal assist function typically have a disc on the crank shaft featuring a ring of magnets coupled with a Hall sensor giving rise to a series of pulses, the frequency of which is proportional to pedaling speed. The controller uses pulse width modulation to regulate the power to the motor. Sometimes support is provided for regenerative braking but infrequent braking and the low mass of bicycles limits recovered energy. An implementation is described in an application note for a 200 W, 24 V Brushless DC (BLDC) motor.[43]
Over the years our lineup has grown, and as a result, the offering has become more complicated than it needs to be. Specifically, this year we introduced a 500w geared motor option to the lineup and that has created some redundancy. Before outlining changes, we would like to ensure everyone that we will be stocking enough inventory of previously sold parts for a long enough time to ensure all warranties...

The leading U.S. developer and distributor of electric bicycles and electric scooters, Currie Technologies offers a wide range of proprietary E-bike technologies across several bicycle designs. In order to meet the needs of its target market, Currie offers a wide variety of bicycle types with varying intended uses and at a variety of price points. With a “good, better, best” approach to E-bike marketing, Currie starts with its EZIP brand for opening priced bicycles which are primarily sold through mass market and web-based retailers. The IZIP brand is reserved for its mid- to high-end offerings, sold primarily through full service, specialty retailers.
Sometimes space comes at the most premium of commodities and the Tern Vektron offers a space-saving folding option. At about $3,400, the sturdy folding joints include a magnet and rubber strap to keep the bike folded. The quick-release pedals (wheels release too) help with storage of a bike that doesn’t give up power with a 20-mph speed that can range over 60 miles. But the best part is placing two in the trunk of a car.
Best Buys are selected in the table below because they work well, come from solid companies and get high marks from users. Generally, buyers can opt to assemble the bike themselves, or pay an assembly fee to their local dealer or bike shop. (Assembly usually includes installing handlebar, pedals, seat and front wheel along with tuning and adjusting.)
I think this is a super interesting bike. I like seeing IZIP stepping into the world of Brose motors. Brose bikes always look clean and refined because of the battery integration. This bike is a pretty great value for what you get. Totally integrated lights, rear rack, fenders, and plus sized tires are all great to have. I wish it had a dual chainring in the front, but you can always add one on a Brose motor.
As electric bike options continue to expand, more brands are integrating the battery more seamlessly. That makes them look sleeker (and more like a real bike). Batteries are expensive, so make sure there's a good way lock the battery to your bike if you'll be keeping it outside. Overall weight is important. Some battery and motors can add 15 pounds or more to the bike. With assist, you won't feel that much when you're riding, but you will if you have to carry your bike up stairs or lift it onto a bike rack.
×