"Electric bikes are great for giving you an extra boost and a bit more zip for when you're a bit low on energy," says two-time Olympic gold winner Victorian Pendleton. "E-bikes are also a fantastic route into cycling for beginners, or for those returning to cycling, as they provide a helping hand when it comes to conquering physical fitness challenges." 
Because they’re electrically powered, e-bikes sit in a bit of a gray area between bicycles and motorcycles. While some states have enacted specific legislation to state where electric bikes can and can’t be ridden, in other states outdated laws mean they’re regulated as a moped or motor vehicle which can cause confusion over registration requirements, access to cycling infrastructure and how old you have to be before you can ride one.
EcoBike offers a state of the art battery and frame design, and artfully combines the highest quality parts from the most competitive manufacturers – Shimano, SRAM, and Cionlli, to name a few. The result is a masterpiece in convenience, reliability, and style. Combining style with functionality, EcoBike is a world-renowned designer of quality electric bicycles, sold all over Europe and North America.
Beach cruiser fans rejoice with the Raleigh Retroglide iE Step Thru. Cruise the boardwalk with maximum style and minimum effort as you enjoy the perks of a 350 watt motor and a top pedal-assisted speed of 20mph. Enjoy the comfort of an upright riding position thanks to the backswept handlebar and take advantage of the cargo-carrying capacity, thanks to the rear rack, to run errands around town or commute to work. With a claimed range of 35 miles, the Raleigh Retroglide is a great choice for anyone who wants to add a little speed to daily cruise.
What a treat to do business with the folks at Hill Topper. I now have two commuter units one in Idaho and one in Denver my average ride is 25 to 35 miles. I have been riding for about 15 years but being the age of 80 I needed a little help the past few years. I researched electric bikes a few years ago even rode a couple here in Denver but I wanted my own personal look and feel. So about five years ago I found Hill Toppers. What a treat first the units are the best but that is part of the good part the people at Hill Toppers are the very best to work with and enjoy. I had to have a knee replacement last July well thank god for my bike it was the best therapy I could ask for. When in Idaho I get to ride along the Snake river what a treat knowing that I have this unit to help if the wind or rain shows up. When in Denver I cover a lot of area as they have wonderful bike trails all over the area. I ride all of the downtown area and the Cherry Creek dam up and over it takes some effort to get that done but with the help of Hill topper it is a beautiful ride up and overlooking the whole of Colorado. Thank you Andrew,Charles,Sam,Mark.

The G-10 features a top-tube mounted on-off button and ‘set’ button for one of four power modes, all linked to a Groove Go wheel mounted motor via a removable clip-lock battery stashed under the down-tube. Kalkhoff has paired this with a mid-range Shimano Tiagra 1x10 speed drive-train and effective Shimano M396 hydraulic disc brakes. A nice touch is the anti-slip ‘grip-tape’-covered flat pedals, perfect for a bike to be ridden around town without specialist shoes.
For the past few months, I’ve been preparing for a trip through Scotland and England. If you’ve read any of my other lifestyle posts, then you know that I think the absolute best way to explore an area is by bicycle. So, when I was planning my trip, of course I decided to do an electric bike tour. I’ll be doing a John O’ Groats to Land’s End ride, approximately 900 miles. Let’s talk about the best electric bikes for bike touring.

Another type of electric assist motor, often referred to as the mid-drive system, is increasing in popularity. With this system, the electric motor is not built into the wheel but is usually mounted near (often under) the bottom bracket shell. In more typical configurations, a cog or wheel on the motor drives a belt or chain that engages with a pulley or sprocket fixed to one of the arms of the bicycle's crankset. Thus the propulsion is provided at the pedals rather than at the wheel, being eventually applied to the wheel via the bicycle's standard drive train.
This bike is designed for quick handling and high speeds, and not for comfort per se. The Focus is all about form following function. This is both good and bad: you have a bike that is sleek, powerful and nimble, but you also are going to be crouched over the front wheel for better control, gripping no-nonsense grips and riding a saddle meant for performance, not cruising.
Installing an electric bike kit is easy to do, can be done in just an hour or so and can last for many years if done right initially. Deciding on the right electric bike conversion kit, the one that suits your riding style and your bike best, is the most important decision you’ll make during this process. Good news... you’ve come to the right place!
Designed for riding around town, this pedal-assist bike has four levels of electric assistance – Eco, Tour, Sport and Turbo – and a maximum assisted speed of 20 miles per hour. This is a well designed and engineered bike, with Shimano Nexus components and a Bosch Performance electric-assist mid-drive system. Front and rear lights are included, and you can even use the battery to charge your smartphone. The integrated ring-lock will help deter would-be thieves, but it’s always best to back this up with a dedicated bike lock.
The Focus comes with lots of extras: front and rear lights, bell, fenders, chain guard and rack. The Panasonic drive system that powers it is the same unit that was on the Kalkhoff bike that climbed to the top of the Pikes Peak bicycle race, one of only 3 types of bikes to survive this 8000 foot 20-mile climb in 2012. The Panasonic drive system is a well built piece of E-bike engineering which drives the bottom bracket and powers the rear wheel through the same drive chain as the rider. It is only available on OEM bikes which have been-purpose built using it. It stands as one of the most refined mid-drive systems ever built.

The new Electric Bike Kit Owners group on Facebook has taken off within the first week of its creation. Around 400 people have joined the online group with new members being added every day. E-bike riders are sharing the various ways that they have converted their bikes using the E-BikeKit Complete Electric Bike Conversion System. Each one of the electric bike conversions is more unique than the next. Some e-bike...

OHM bicycles use E-One Moli Energy (Canada) Ltd’s Lithium-ion battery packs to deliver the safest and highest power of any mid-large e-bike battery currently available on the market. With advanced protection, performance, and convenience, Li-ion batteries are fast charging and maintain steady power output throughout their lifespan. The e-bike battery packs are specifically configured to work with the BionX motor for optimum range and performance.
You should also think about how much gear you are going to need to carry. The reason this will affect your decision is because some electric bikes don’t have the capability to mount a front rack while others do. Plan on doing a 3-day trip? You could probably get away with just a rear rack. My advice though would to be to purchase an electric bike with the capability to mount a front rack as well. This way, if you decide to plan a longer trip in the future, you can simply buy a rack and be on your way instead of potentially having to buy a new bike.
The leading U.S. developer and distributor of electric bicycles and electric scooters, Currie Technologies offers a wide range of proprietary E-bike technologies across several bicycle designs. In order to meet the needs of its target market, Currie offers a wide variety of bicycle types with varying intended uses and at a variety of price points. With a “good, better, best” approach to E-bike marketing, Currie starts with its EZIP brand for opening priced bicycles which are primarily sold through mass market and web-based retailers. The IZIP brand is reserved for its mid- to high-end offerings, sold primarily through full service, specialty retailers.
By 1898 a rear-wheel drive electric bicycle, which used a driving belt along the outside edge of the wheel, was patented by Mathew J. Steffens. Also, the 1899 U.S. Patent 627,066 by John Schnepf depicted a rear-wheel friction “roller-wheel” style drive electric bicycle.[7] Schnepf's invention was later re-examined and expanded in 1969 by G.A. Wood Jr. with his U.S. Patent 3,431,994. Wood’s device used 4 fractional horsepower motors; connected through a series of gears.[8]
“First, Taiwan and China have been building almost all the bikes for the entire world for the past 30-40 years. They have ecosystems and two generations of tradesmen that result in the best bikes in the world. Look at all the top brands—Giant, Specialized, Cannondale— they all make their top end bikes in China and Taiwan. Even look at the Italian brands and you’ll see they build their frames in China and Taiwan and paint them in Italy.”
E-bikes mostly use motors and battery options from a few major suppliers: Bosch, Yamaha, Shimano, and Brose. A few other brands exist, but are less reliable or powerful. Some, like the Yamaha system, have more torque and others are quieter. But generally all four make good options. Look for motor output (in watts) which will give you an idea of total power. But watt hours (Wh) is perhaps a better figure to use—it takes into account battery output and life to give a truer reflection of power.
×