Known for not only their powerful line of mountain bikes and specialty bikes—cruisers to fat—Bulls also has a versatile line of urban models. The Cross E Wave comes as one of their more affordable options at roughly $2,800, but at 20 mph can still range for up to 134 in optimal conditions with everything you’d expect (fenders, lock, lights and adjustability). The entire family of Bulls e-bikes has specifications built for any scenario.
All three road bikes receive their power from Yamaha’s PWSeries SE motor that comes with four levels of support: ECO+, ECO, STANDARD, and HIGH. The mid-drive motor supplies a maximum of 70 Nm (52 ft-lbs) of torque and cadence support up to 110 rpm. The motors are designed to provide assistance up to 20 mph (32 km/h). Any faster, and it’s all you providing the power.
Above all, the Brompton is a lot of fun to ride in urban settings. Its powerful enough to breeze up hills with near zero effort, but feels nimble. As with any Brompton, you probably won't win a half-mile sprint on it, but thanks to the pedal assistance, you most certainly will get off to a flying start. The reason it stands above other electric bikes is that Brompton has worked out how to apply power assistance to your pedalling so it feels natural. It also doesn't feel so much like it's trying to fight you once you reach the maximum, 15mph assisted speed.
The Nobby Nic tires would work equally well on road, loose dirt, gravel, fire roads, or anything of the like really. The hardtail geometry also isn’t so aggressive that it would be uncomfortable over long distances. Of course, comfort over long distances is key during bike touring. Even though the bike does not come with a rear rack, it does have eyelets for mounting. A rear rack should allow you to carry plenty for a 3-5 day excursion.
This bike is designed for hauling. The Yuba Spicy Curry has a combined capacity of 500lbs (200lbs on the front including rider, and 300lbs of passengers or cargo on the back). To help move this weight, you’d expect a decent motor, and the Bosch Performance Line CX delivers. Normally only found on mountain bikes, the 75Nm of torque makes light work of hills, even with the heavy load.
Electric Motor. Having a battery that will last long is just one piece of the puzzle. The electric motor should be powerful enough to move the bike on flat surfaces without any problems and to overcome some low-steep slopes. It will help you out on steeper slopes, it won’t let you down. If the motor or “the engine” is more powerful you’ll be able to accelerate faster and to reach a higher momentum. This will allow you to reach your destination faster and without you getting tired.
And let’s not forget the economic advantages of owning an e-bike. The annual cost of running a new family car is, on average, about $9,000 per year. Running an electric bike costs around $400 per year. And while filling a gas tank costs around $30, recharging an electric bike battery costs only about 50 cents. A tank of gas may get you further, but not 60 times further!
I tested the Sduro 8.0 towards the end of last year (there's a new range out for 2018) and was surprised by its nimbleness. You expect e-bikes to be less maneuverable than their acoustic predecessors, but, pelting down some bespoke forest paths near Pedal & Spoke in the Surrey hills, I found I completely forgot that there was a box of electronic EPO on my frame. Partly, that's because the battery is cleverly integrated into the frame to decrease drag; mostly, it's because the suspension is soft and the steering nimble, much like a normal mountain bike.
Even though it’s a hefty amount of money to fork over upfront, LaLonde says you’ll likely save money in the long run. If you use public transportation, do the math to see how much you could save over time. If you choose an e-bike over a car, you’re foregoing auto maintenance, gas, insurance, parking fees, and potential tickets, LaLonde adds. “So while there’s sticker shock for a first-time bike buyer, it can still be cost-effective.”
OHM bicycles use E-One Moli Energy (Canada) Ltd’s Lithium-ion battery packs to deliver the safest and highest power of any mid-large e-bike battery currently available on the market. With advanced protection, performance, and convenience, Li-ion batteries are fast charging and maintain steady power output throughout their lifespan. The e-bike battery packs are specifically configured to work with the BionX motor for optimum range and performance.
The complete integration of the Optibike is achieved from the ground up with a disign focused on high performance, safety, and ease of operation. Front and rear long travel suspension with disc brakes gives the rider confidence. The fully integrated package gives the utmost in convenience allowing the rider to ride on road, off road and the up or down the steepest hills. Optibike is in a class of its own. The Monocoque frame has sleek styling and a low center of gravity for stable handling. All electronics and long-running battery are safely housed inside the frame.
But this bike isn’t just about the accessories. The powerful 48V 13Ah battery will allow you to pedal for longer, with some riders getting over 100 miles from one charge. The bike can be ridden as pedal-assist or throttle only and it’s equipped with full suspension and puncture-free Kenda tires. It folds up neatly to fit into the boot of a car or for commuting, though at 57 pounds, it’s heavy to cart around. A great value-for-money commuting bike with lots of features.
Controllers for brushless motors: E-bikes require high initial torque and therefore models that use brushless motors typically have Hall sensor commutation for speed and angle measurement. An electronic controller provides assistance as a function of the sensor inputs, the vehicle speed and the required force. The controllers generally allow input by means of potentiometer or Hall Effect twist grip (or thumb-operated lever throttle), closed-loop speed control for precise speed regulation, protection logic for over-voltage, over-current and thermal protection. Bikes with a pedal assist function typically have a disc on the crank shaft featuring a ring of magnets coupled with a Hall sensor giving rise to a series of pulses, the frequency of which is proportional to pedaling speed. The controller uses pulse width modulation to regulate the power to the motor. Sometimes support is provided for regenerative braking but infrequent braking and the low mass of bicycles limits recovered energy. An implementation is described in an application note for a 200 W, 24 V Brushless DC (BLDC) motor.
Comfort. Like any other type of bike the electric bike should offer you a comfortable ride. All general components such as, saddle, handlebars, the geometry of the frame should put you in a comfortable position. If the bike doesn’t satisfy these criteria it’s certainly not the best electric bike on the market. After all you’re going to spend quite a lot of time riding it, so you might as well look for a more comfortable solution.
E-bikes are classed according to the power that their electric motor can deliver and the control system, i.e., when and how the power from the motor is applied. Also the classification of e-bikes is complicated as much of the definition is due to legal reasons of what constitutes a bicycle and what constitutes a moped or motorcycle. As such, the classification of these e-bikes varies greatly across countries and local jurisdictions.
Glenn has over 15 years of experience building bicycle wheels and has worked for and with the local cycling community in the Philadelphia area for the past 20 years. Glenn is in charge of all wheel building activities at E-BikeKit and oversees quality control on wheels built in the Newportville, PA location. Since joining E-BikeKit in early 2010 Glenn has had a huge impact on the success of the company...
The Moterra is Cannondale’s biggest and baddest e-mtb and just looking at this thing you can see that it’s built to withstand some wicked downhills and big drops. With 130mm of front and rear travel, paired up with 27.5-inch wheels and trail-grabbing 2.8-inch tires, along with a KS LEV Integra Dropper Post make this pedal-assist mountain bike a great option if you want to climb farther to shred longer, but don’t want to lug your bike uphill for ages. The 250w motor, placed slightly farther forward than most other bikes to optimize weight distribution and handling, will give you a nice boost so you can enjoy the ride up and not be too gassed when you get to the top. After all, it’s all about the ride down, right?