The two most common types of hub motors used in electric bicycles are brushed and brushless. Many configurations are available, varying in cost and complexity; direct-drive and geared motor units are both used. An electric power-assist system may be added to almost any pedal cycle using chain drive, belt drive, hub motors or friction drive. BLDC hub motors are a common modern design. The motor is built into the wheel hub itself, and the stator fixed solidly to the axle, and the magnets attached to and rotating with the wheel. The bicycle wheel hub is the motor. The power levels of motors used are influenced by available legal categories and are often, but not always limited to under 750 watts.

Powered by a 250-watt Brose Centerdrive system, the Redux is capable of reaching speeds of up to 28 mph, which comes in handy when dodging traffic. Its 36-volt lithium-ion battery provides enough juice to give the bike a range of up to 80 miles between recharges, making it a great option for daily commuters. Raleigh even outfitted the bike with wide tires which provide stability and traction, even when the road gets wet. Other key features include a 10-speed Shimano crankset and shifters and a built-in LCD screen that displays all the usual information.

The eZeeBike has been a successful and sought-after line of e-bikes in Europe that are now available in the United States. Range of 30 miles and top assisted speed of 20 mph is possible with the three standard (non-folding) models. With well-crafted aluminum alloy frames and lithium batteries, these bikes are lighter than other electric bikes. Equipped with 250- and 350-watt silent (gearless) hub motors, eZee bikes come with many accessories as standard equipment. Different models may include: fenders, front shocks, suspension seat tube, Velo cycle computer , integrated front and rear lights, rear luggage rack with spring-loaded bar and integrated bungy chords, chain guard, and foldability.

The two most common types of hub motors used in electric bicycles are brushed and brushless. Many configurations are available, varying in cost and complexity; direct-drive and geared motor units are both used. An electric power-assist system may be added to almost any pedal cycle using chain drive, belt drive, hub motors or friction drive. BLDC hub motors are a common modern design. The motor is built into the wheel hub itself, and the stator fixed solidly to the axle, and the magnets attached to and rotating with the wheel. The bicycle wheel hub is the motor. The power levels of motors used are influenced by available legal categories and are often, but not always limited to under 750 watts.

The eZeeBike has been a successful and sought-after line of e-bikes in Europe that are now available in the United States. Range of 30 miles and top assisted speed of 20 mph is possible with the three standard (non-folding) models. With well-crafted aluminum alloy frames and lithium batteries, these bikes are lighter than other electric bikes. Equipped with 250- and 350-watt silent (gearless) hub motors, eZee bikes come with many accessories as standard equipment. Different models may include: fenders, front shocks, suspension seat tube, Velo cycle computer , integrated front and rear lights, rear luggage rack with spring-loaded bar and integrated bungy chords, chain guard, and foldability.
Added help on the hills: An extra boost on the hills or when cycling into a headwind is probably the first thing most people think about when they’re considering an electric bike. If you live in a valley where the only way out is up, then having a bit of motor assistance may mean the difference between a happy cycling experience and not cycling at all.

Pedal Assist Electric Bikes, also known as "E-bikes," are bicycles that have an electric motor to assist riders. The motor is powered by a battery and only assists the cyclist when he/she is pedaling. Electric bikes come in many different styles including commuter, recreational, step-thru with low-entry frames, cargo and mountain. They all have one thing in common: e-bikes are very simple to ride – if you can ride a bike you can ride an electric bike!


The F1-trained engineers at William Advanced Engineering assisted with the electrical parts and the result is a 250W motor that provides pedal assistance via the front hub – which is a highly unusual approach –  drawing power from a 300Wh battery pack that sits in a bag and goes on the front where the Brompton luggage rack would normally sit. You can also opt for a larger bag that holds both the battery and your spare suit or laptop or whatever. 
Because they’re electrically powered, e-bikes sit in a bit of a gray area between bicycles and motorcycles. While some states have enacted specific legislation to state where electric bikes can and can’t be ridden, in other states outdated laws mean they’re regulated as a moped or motor vehicle which can cause confusion over registration requirements, access to cycling infrastructure and how old you have to be before you can ride one.

Controllers for brushless motors: E-bikes require high initial torque and therefore models that use brushless motors typically have Hall sensor commutation for speed and angle measurement. An electronic controller provides assistance as a function of the sensor inputs, the vehicle speed and the required force. The controllers generally allow input by means of potentiometer or Hall Effect twist grip (or thumb-operated lever throttle), closed-loop speed control for precise speed regulation, protection logic for over-voltage, over-current and thermal protection. Bikes with a pedal assist function typically have a disc on the crank shaft featuring a ring of magnets coupled with a Hall sensor giving rise to a series of pulses, the frequency of which is proportional to pedaling speed. The controller uses pulse width modulation to regulate the power to the motor. Sometimes support is provided for regenerative braking but infrequent braking and the low mass of bicycles limits recovered energy. An implementation is described in an application note for a 200 W, 24 V Brushless DC (BLDC) motor.[43]
BULLS never ceases to amaze. This full-suspension fat bike is fitted with a Bosch mid-drive motor for enhanced hill climbing. The 4-inch wide Schwalbe Jumbo Jim Snakeskin tires are genuinely monstrous. It's exquisitely designed and equipped with all the best components. As with all BULLS ebikes, the Monster E FS comes with a 2-year warranty and 5-years on the frame.
Featuring a Bosch Performance CX motor, a Suntour Aion air suspension fork, X-Fusion O2 air-sprung element rear shock, and 27.5-inch Schwalbe Almotion tires, the Delite nuvinci is the perfect commuter slash “town and country” ebike. But at more than $6,000, the price is sure to stop people in their tracks. However, Riese and Muller make every one of those dollars count as it’s included a slew of accessories which make the bike that much more appealing. From an included Abus bike lock and integrated lighting to water bottles (and holders) and built-in luggage rack, little to no after-market additions are necessary.
Those buyers aren’t likely to get a major workout. Researchers from the University of Tennessee found in a study of walkers, ebike riders and traditional bike riders that those who completed a 4.43-kilometer hilly route on an ebike used 22 percent less energy than traditional bikers and 64 percent less than walkers, most likely because the ebikers got to the finish line faster than the others. But perks included higher levels of enjoyment and no need for a shower when they were done.
Known for not only their powerful line of mountain bikes and specialty bikes—cruisers to fat—Bulls also has a versatile line of urban models. The Cross E Wave comes as one of their more affordable options at roughly $2,800, but at 20 mph can still range for up to 134 in optimal conditions with everything you’d expect (fenders, lock, lights and adjustability). The entire family of Bulls e-bikes has specifications built for any scenario.
Standard front suspension is the 7” conventional single crown forks. With 2 dials to adjust compression and rebound adjustment and air adjustment for preload, these forks are light weight and versatile enough for most situations. For heavier or more adventurous riders, the forks can be upgraded. The rear suspension is adjustable for casual every day riding or more aggressive off road environments.
Range is a key consideration with e-bikes, and is affected by factors such as motor efficiency, battery capacity, efficiency of the driving electronics, aerodynamics, hills and weight of the bike and rider.[36][37] Some manufacturers, such as the Canadian BionX or American Vintage Electric Bikes,[38] have the option of using regenerative braking, the motor acts as a generator to slow the bike down prior to the brake pads engaging.[39] This is useful for extending the range and the life of brake pads and wheel rims. There are also experiments using fuel cells. e.g. the PHB. Some experiments have also been undertaken with super capacitors to supplement or replace batteries for cars and some SUVS. E-bikes developed in Switzerland in the late 1980s for the Tour de Sol solar vehicle race came with solar charging stations but these were later fixed on roofs and connected so as to feed into the electric mains.[40] The bicycles were then charged from the mains, as is common today. While ebike batteries were produced mainly by bigger companies in past, many small to medium companies have started using innovative new methods for creating more durable batteries. State of the art, custom built automated precision CNC spot welding machines[41] created 18650 battery packs[42] are commonly used among Do-it-yourself ebike makers.
Stark Drive has always included a front head light by default at no charge for safety with the rear brake light being optional for those who needed this. Now we have reconfigured the homepage so that the rear headlight options i clearly visible and availble without needing to compllicate matters by adding it from our accessories page. We highly recommend a rear brake light no matter what motor you choose for Stark Drive.
EcoBike offers three e-bike models. The Vatavio fold-and-carry electric bike (pictured above) is innovative and well constructed. The Elegance (pictured below) is a classic design with step-through frame, offering an easy, comfortable ride. The AdventureÂ’s revolutionary frame design allows for true versatility, going from the pavement to mountain trails with ease.
The Nuvinci hub system is the best geared hub that I have ever used. There is literally no maintenance to be done on this drivetrain. I’d recommend buying it with the Gates Carbon belt because you’ll never run into issues like the chain falling off. You operate the Nuvinci system with a grip shifter and can of course shift even when you’re not moving.
Electric Bikes and Scooters have become the go to method of transportation for anyone looking for a healthy, eco-friendly way to get to work, school or anywhere within a 30 mile radius. We are the largest E-bike retailer online. With over 120 models from over 40 different manufactures to choose from, you'll be sure to find the right Electric Bike or Electric Scooter for you. We offer E-bikes only from the highest rated brands, including bikes from QuietKat, Populo, E-Joe, Juiced and more. We live, breath and ride electric bikes so don't be afraid to contact our experts today for guidance on picking the right one for your needs. Our bikes are federally classified as electric bikes and not motorized bikes, which means that in most states, you don't need license, registration or insurance. 
×