Thousands of people have discovered the electric bike smile just by trying out an electric pedal assist bike. So this year Subaru VeloSwap has partnered with the Colorado Electric Bikes Expo sponsored by BEST electric bike USA. There will be an entire area just dedicated to showcasing electric bikes. You can view and experience the latest brands, styles, and new  technology in the world of electric bikes.  Reps will be available to show you how they work &  answer questions. This is a great opportunity for you to see, and learn about, and even ride all the top brands of electric bikes.   On hand will be brands like PEDEGO, EASY MOTION, HAIBIKE, RIESE & MULLER, MAGNUM, STROMER, BOSCH, YAMAHA,...

Glenn has over 15 years of experience building bicycle wheels and has worked for and with the local cycling community in the Philadelphia area for the past 20 years. Glenn is in charge of all wheel building activities at E-BikeKit and oversees quality control on wheels built in the Newportville, PA location. Since joining E-BikeKit in early 2010 Glenn has had a huge impact on the success of the company...


More powerful pedelecs which are not legally classed as bicycles are dubbed S-Pedelecs (short for Schnell-Pedelecs, i.e. Speedy-Pedelecs) in Germany. These have a motor more powerful than 250 watts and less limited, or unlimited, pedal-assist, i.e. the motor does not stop assisting the rider once 25 km/h has been reached. S-Pedelec class e-bikes are therefore usually classified as mopeds or motorcycles rather than as bicycles and therefore may (depending on the jurisdiction) need to be registered and insured, the rider may need some sort of driver's license (either car or motorcycle) and motorcycle helmets may have to be worn.[14] In the United States, many states have adopted S-Pedelecs into the Class 3 category. Class 3 ebikes are limited to <=750 watts of power and 28 mph.[15]
Whether the terrain is flat or hilly impacts the distance you can travel, as does the weight of the bike, your own weight, the gearing available on the bike, and how much juice you give it. We suggest that a distance of 10 to 20 miles is a realistic expectation. Of course, if you're prepared to do at least some pedaling, you can extend that dramatically.

The Nobby Nic tires would work equally well on road, loose dirt, gravel, fire roads, or anything of the like really. The hardtail geometry also isn’t so aggressive that it would be uncomfortable over long distances. Of course, comfort over long distances is key during bike touring. Even though the bike does not come with a rear rack, it does have eyelets for mounting. A rear rack should allow you to carry plenty for a 3-5 day excursion.


Both land management regulators and mountain bike trail access advocates have argued for bans of electric bicycles on outdoor trails that are accessible to mountain bikes, citing potential safety hazards as well as the potential for electric bikes to damage trails. A study conducted by the International Mountain Bicycling Association, however, found that the physical impacts of low-powered pedal-assist electric mountain bikes may be similar to traditional mountain bikes.[68]

With its chunky, plus-sized tires, at first sight, the E3 Peak Plus seems like a cross between a hardtail mountain bike and a fat bike. It’s good looking: the mid-drive motor and removable, lightweight battery fit in nicely with the lines of the bike, making it look more like a standard mountain bike than other models. Unlike many mid-range e-bikes, it also comes in three sizes — handy if the usual one-size-fits-all approach doesn’t fit you.
The Liv Amiti-E+2 is a low-priced but highly versatile e-bike. It’s just as much at home on the pavement as it is on bike paths and rail trails. But don't feel constrained to groomed paths. Front suspension and 42mm-wide tires mean you can take on off-road detour on your way home from work. Speaking of work, this e-bike makes a great commuter thanks to rack and fender mounts and integrated lights for riding after dark. Internal cable routing and a nicely integrated battery make for clean lines and 9-speed shifters give you plenty of gearing options for whichever type of terrain you decide to tackle. This do-everything bike is great option if you’re riding includes a little bit of this and a little bit of that.
The leading U.S. developer and distributor of electric bicycles and electric scooters, Currie Technologies offers a wide range of proprietary E-bike technologies across several bicycle designs. In order to meet the needs of its target market, Currie offers a wide variety of bicycle types with varying intended uses and at a variety of price points. With a “good, better, best” approach to E-bike marketing, Currie starts with its EZIP brand for opening priced bicycles which are primarily sold through mass market and web-based retailers. The IZIP brand is reserved for its mid- to high-end offerings, sold primarily through full service, specialty retailers.
It will be of little surprise to learn that the Hanebrink all-terrain vehicle was designed by six time Mountain Bike national class champion and former U.S. National Team member Dan Hanebrink. It's based on 1993's Extreme Terrain fat tire pedal bike and is made to order at the Fortune Hanebrink workshop at Big Bear Lake, California. Echoing the philosophy of many electric assist bicycle makers, Hanebrink says: "We are not trying to replace standard bicycles, we want to replace cars and trucks."
As the weather begins to drop and the snow starts to fall, it is increasingly important to know how to properly care for your electric bike and its Lithium-ion battery. It may be possible for some people to ride their bikes during the winter months, while others must pack them away until the warmer weather returns. Whether you plan to ride in the cold and snow or if you decide to...
The entire drive system is neatly incorporated into the bike's design for optimal weight distribution and the ultimate in sexy design, while users control torque and power output, which peaks at a surprisingly punchy 530W, via a cool Mission Control App that can also be programmed to a time or distance parameter to ensure there's enough power to get you home.
FRAME GEOMETRY  EcoBike electric bikes have been specially designed with the daily commuter in mind. The frame is constructed from a high-strength, lightweight 6061 aluminum alloy that maximizes safety and durability.  The enhanced frame design features comfort ergo-geometry that is more upright than a traditional mountain or road bike.  Every EcoBike electric bike is outfitted with suspension on both front forks (except Vatavio) and seat post to deliver a smoother ride. 
China's experience, as the leading e-bike world market, has raised concerns about road traffic safety and several cities have considered banning them from bicycle lanes.[2] As the number of e-bikes increased and more powerful motors are used, capable of reaching up to 30 miles per hour (48 km/h), the number of traffic accidents have risen significantly in China. E-bike riders are more likely than a car driver to be killed or injured in a collision, and because e-bikers use conventional bicycle lanes they mix with slower-moving bicycles and pedestrians, increasing the risk of traffic collisions.[2]
The wiring could be better, but I think I’m going to make some adjustments to that myself. It’s also worth noting that the motor is in the rear hub just like a basic commuter ebike. This will affect the way it feels, as bottom bracket motors give a more seamless “pedal assist” experience. Of course, this bike seems like it’s made as practical transportation. To me, anything that gets cars off the road is a good thing so lets take it for a ride.
IZIP has been manufacturing high-end, affordable electric bikes since 2005. We think the IZIP E3 Dash is the best of the bunch. This class 3 pedelec delivers power as you pedal taking you to speeds of 28 mph. It's fantastic for your commute, especially if you have hills to climb. The mid-mounted motor configuartion maximizes torque to get you up inclines.
We rode the Vado through the gauntlet, including some of the steepest hills in Palo Alto, and it easily handled everything we threw at it, maintaining a steady 20 miles per hour even on the most daunting of ascents. The bike also handles well on downhills and is both nimble and quick on city streets and paved trails. It’s even comfortable to ride for extended distances, which is vitally important for any bike built for urban settings.
Haibike ships the HardNine with 29-inch tires, 180-millimeter hydraulic disc brakes, a 100-millimeter front suspension fork, and a nine-speed Shimano shifting system. The bike’s LCD readout is affixed to the handlebars and displays the current speed, level of charge, remaining range, and current pedal assist mode. The company says the battery can be completely recharged in just four hours, minimizing downtime between rides.
The Benno e-Joy promises to be as fun to play with as it is to look at. Benno says it took inspiration from the timeless style of vintage Italian scooters and classic German cars. Add in the functionality of front and rear cargo racks and the 250w pedal-assist motor and you have a beautiful bike that's ready for anything. Cruise into town for groceries, wander comfortably along a gravel path on 2.35-inch balloon tires, or add the child seat attachment and take your kid along for the ride, and beach-goers will appreciate the surfboard rack. Whatever your cycling pleasure pursuit may be, the e-Joy can be your ticket to fun.
×