Electric mountain bikes have garnered a lot of attention for their ability to help riders go higher, further, and faster on the trail. As a result, there have been some impressive new eMTB models to hit the market in recent years, making it easier than ever to head off-road. Our favorite is the Haibike SDURO HardNine, which comes equipped with a 350-watt Bosch Performance CX drive and a 500 watt-hour battery. This gives it a range of up to 70 miles, along with a top speed of 20 mph, which is plenty fast on singletrack.
Torque sensors and power controls were developed in the late 1990s. For example, Takada Yutky of Japan filed a patent in 1997 for such a device. In 1992 Vector Services Limited offered and sold an e-bike dubbed Zike.[9] The bicycle included NiCd batteries that were built into a frame member and included an 850 g permanent-magnet motor. Despite the Zike, in 1992 hardly any commercial e-bikes were available.
7. Winner selection and notification: Winners of the Sweepstakes will be selected in a random drawing under the supervision of the Sponsor. Winners will be notified via e-mail to the e-mail address they entered the Sweepstakes with within five (5) days following the winner selection. Electric Bike Technologies LLC shall have no liability for a winner's failure to receive notices due to winners' spam, junk e-mail or other security settings or for winners' provision of incorrect or otherwise non-functioning contact information. If the selected winner cannot be contacted, is ineligible, fails to claim the prize within 15 days from the time award notification was sent, or fails to timely return a completed and executed declaration and releases as required, prize may be forfeited and an alternate winner selected. The receipt by winner of the prize offered in this Sweepstakes is conditioned upon compliance with any and all federal and state laws and regulations. ANY VIOLATION OF THESE OFFICIAL RULES BY ANY WINNER (AT SPONSOR'S SOLE DISCRETION) WILL RESULT IN SUCH WINNER'S DISQUALIFICATION AS WINNER OF THE SWEEPSTAKES AND ALL PRIVILEGES AS WINNER WILL BE IMMEDIATELY TERMINATED.
The Dash is an excellent, low-cost option for those looking for an intro to e-bikes kind of ride. The TranzX motor will take you up to 28mph for about 16-35 miles per charge–more if you’re conservative with the assist. The components aren’t too shabby either. Shimano M365 hydraulic disc brakes keep you safe, the Shimano Deore SGS drivetrain, and RockShox Paragon fork with 65mm of travel make it a great entry level option.
Electric Bike Parts, what fits my older electric bike? What can I modify to fit my bike? A brief overview of what electric bike parts do, and how generic electric bike parts can be adapted to your bike. The Plugs, Wires & Connectors Hardly a day goes by without a call that goes about like this; "I have a (whatever) electric bike that I used to ride 6 years ago....
By 1898 a rear-wheel drive electric bicycle, which used a driving belt along the outside edge of the wheel, was patented by Mathew J. Steffens. Also, the 1899 U.S. Patent 627,066 by John Schnepf depicted a rear-wheel friction “roller-wheel” style drive electric bicycle.[7] Schnepf's invention was later re-examined and expanded in 1969 by G.A. Wood Jr. with his U.S. Patent 3,431,994. Wood’s device used 4 fractional horsepower motors; connected through a series of gears.[8]
You turn it on by pressing the green button on the battery once for low power and twice for high, although to be honest, there is not a lot of difference between them. After that, you just pedal. There are no gears, no chain to muck up your trousers (a motorbike-style carbon fibre belt is used instead) and not that much difference in feeling compared to riding a normal bike.

Certainly not for the entry-level e-bike buyer, those who need to strap cargo to their back now have a new option with the Riese & Muller Load option, with full cargo space on the front of the bike. While over $6,000, the full-suspension bike has adjustability to allow for differing loads. Safety features include LED headlights and premium components abound.


Glenn has over 15 years of experience building bicycle wheels and has worked for and with the local cycling community in the Philadelphia area for the past 20 years. Glenn is in charge of all wheel building activities at E-BikeKit and oversees quality control on wheels built in the Newportville, PA location. Since joining E-BikeKit in early 2010 Glenn has had a huge impact on the success of the company...
This bike is named the GSD because with it you can Get Stuff Done. Twenty-inch wheels keep the center of gravity low so heavy payloads—it's rated up to 400lbs—are easy to balance and a short (for a cargo bike) 70-inch wheelbase, similar to a standard single bike, make the GSD easy to maneuver. Designed with the urban commuter in mind, the bike can easily break down to 60 percent of its original size to fit into the back of a car and the rear rack doubles as a stand that allows it to stand upright to minimize space inside tight apartments. Put two child seats on the back and take the family along, or drop the seat and let you kid take the bike out himself—anyone from 4'10" to 6'5" can ride this bike. Last but not least, the GSD gives you the option of adding a second battery to extend your range up to about 150 miles on a single charge.

For an overview of Stark Drive Electric Bike, its features and our story click above. Our passion for biking and our determination to take electric bikes mainstream have driven us to create the world’s most affordable electric bike. As technology improves, so will Stark Drive with the caveat that we will always offer the most affordable electric bikes in the world.
Controllers for brushless motors: E-bikes require high initial torque and therefore models that use brushless motors typically have Hall sensor commutation for speed and angle measurement. An electronic controller provides assistance as a function of the sensor inputs, the vehicle speed and the required force. The controllers generally allow input by means of potentiometer or Hall Effect twist grip (or thumb-operated lever throttle), closed-loop speed control for precise speed regulation, protection logic for over-voltage, over-current and thermal protection. Bikes with a pedal assist function typically have a disc on the crank shaft featuring a ring of magnets coupled with a Hall sensor giving rise to a series of pulses, the frequency of which is proportional to pedaling speed. The controller uses pulse width modulation to regulate the power to the motor. Sometimes support is provided for regenerative braking but infrequent braking and the low mass of bicycles limits recovered energy. An implementation is described in an application note for a 200 W, 24 V Brushless DC (BLDC) motor.[43]
In terms of design, the attention to detail is just exquisite. The extra long fenders ensure you’re not going to get wet going through puddles. The cafe lock is hidden well enough to not ruin the look. I do kind of wish that the battery and fork could be that lovely green color, but we can’t have it all folks. For you green haters, it does come in white and black too. There’s also an option for this cute little front carrier if you want to put a bouquet and a baguette in it.
It’s impressive just how traditional a finish they’ve achieved for a pedal-assist bike, especially considering the motor uses Kinetic Energy Recovery to charge itself (like F1 Cars). Firing up the motor is achieved by back-pedaling three times (while travelling over 8mph). It’s a neat idea, and a clever way of doing away with those cables and switches, but in reality it’s fiddly. Riding in the city we occasionally felt ridiculous on a busy street pedaling backward rather than forward to kick off the assist. It’s also a chore getting the bike to speed and going through the motion to activate in tight spaces such as underground garages or on an incline.
So… Welcome to E-BikeKit.com. We’re glad you’re here and we appreciate the opportunity to earn your electric bike kit business. We recommend you do your research before buying your electric bike kit. Please look at E-BikeKit reviews from real customers, browse the web and social media pages and pick up the phone to give us a call to speak with our staff. Rest assured when you decide to buy, with the E-BikeKit, you’ll be purchasing the best quality electric bike kits and batteries, and more importantly, you’ll be purchasing from a true industry leader with a proven record of personal service.
You can also save money and make your own Day6 Patriot ebike as below only with one of several conversion kits such as Enduro Hub or Kinetic 8Fun MidDrive. You can start with your favotive comfy Day6 Bike Frame and save money by converting to electric yourself, or you can order a complete Day6 Patriot Electric bike of your choosing sent fully assembled.
So instead of giving US companies breathing room to manufacture their own e-bikes, the tariffs are largely just hurting the US electric bicycle industry by preventing it from importing and selling affordable e-bikes, without solving the underlying reasons causing US e-bike companies to choose not to manufacture their e-bikes in the US in the first place.
The Moterra is Cannondale’s biggest and baddest e-mtb and just looking at this thing you can see that it’s built to withstand some wicked downhills and big drops. With 130mm of front and rear travel, paired up with 27.5-inch wheels and trail-grabbing 2.8-inch tires, along with a KS LEV Integra Dropper Post make this pedal-assist mountain bike a great option if you want to climb farther to shred longer, but don’t want to lug your bike uphill for ages. The 250w motor, placed slightly farther forward than most other bikes to optimize weight distribution and handling, will give you a nice boost so you can enjoy the ride up and not be too gassed when you get to the top. After all, it’s all about the ride down, right?
×