Electric mountain bikes have garnered a lot of attention for their ability to help riders go higher, further, and faster on the trail. As a result, there have been some impressive new eMTB models to hit the market in recent years, making it easier than ever to head off-road. Our favorite is the Haibike SDURO HardNine, which comes equipped with a 350-watt Bosch Performance CX drive and a 500 watt-hour battery. This gives it a range of up to 70 miles, along with a top speed of 20 mph, which is plenty fast on singletrack.
This article first appeared in Electric Bike Report in June of 2013. Since then, we’ve made some changes to our motor selection - our Direct-Drive motors are now all High-Torque 6x9 wound, so they run slower (approximately 15mph at 36v or 20mph at 48v), and our Geared Motors have been replaced by a 500w version, (approximately 20mph at 36v or 28mph at 48v). The Direct-Drive is now our Heavy-Duty motor and the...
Electric Bike Technologies has been delivering the best experience in electric bike kit conversion since the company was founded in 2008. Driven by a respected founder and a team of dedicated electric bike enthusiasts, the E-BikeKit™ electric bike conversion systems have been sold worldwide to thousands of electric bike riders and fostered partnerships with some of the best brands in the bicycle industry. The company has been featured on NBC’s Good Morning America and the E-BikeKit system is the only electric bike kit system distributed by J&B Importers, the largest bicycle distributor in the United States.
Electric Bike Conversion Kit Systems Now Available from one of USA’s Leading IBD Distributors Philadelphia, PA: Electric Bike Technologies USA, a manufacturer specializing in affordable high-quality electric bicycle conversion kits, announced that their EBikeKit ™ and E-TrikeKit™ systems are now available via J&B Importers. With J&B’s extensive network of authorized dealers, the conversion kit products will now be readily available throughout the country at most local bicycle shops. Of the...

And then add in all of the other e-bike parts including motors, batteries, throttles, speed controllers, etc. All of these parts are mass-produced in China. They simply aren’t available in the US and no one is designing them or manufacturing them. The US would likely have to start by reverse engineering the Chinese products and learning how they produce them. How’s that for irony?

Unlike most e-bikes, the Brompton's battery is integrated into a bag that sits on the front of the bike. While that detracts slightly from the classic, streamlined design, it's handy as it can be unclipped for charging or riding as a regular bike – it's probably one of the easiest to ride without battery assistance thanks to its weight. The battery also powers two lights for safe commuting. 

ELECTRONIC CONTROL  The Zero-Smart-Start speed controller delivers ease of use and smooth drive control and offers a multi-function variable speed output.  It is state of the art, producing consistent efficient power.  The automatic Pedal Assist mode produces a power burst that dramatically assists the pedaling effort.  The Zero-Smart-Start electronic throttle control allows the rider to relax and not pedal at all. 
Bicycles have long been one of the most popular modes of transportation and, in a time where environmental friendless and health are top of mind, the popularity of bicycles shows no signs of slowing down. For many bicycle enthusiasts, an electric bike is the best of both worlds (get where you're going faster and not winded) and with a range of choices and designs available, we've helped narrow down the best models on the market today.
If you want it to, an e-bike can replace a car, which is better for good ol' Mother Earth. Weinart says many young professionals are now seeking a "car-free" or "car-lite" lifestyle. In fact, 65 percent of people said replacing car trips was the main reason for getting an e-bike, according to a recent report. Accessories, such as racks, baskets, fenders, and even cargo e-bikes (for toting groceries or kiddos) are all available to make commuting by bike easier and more comfortable.
“The new tariffs that have hit our industry (and so many others) will be difficult to navigate. Not because they will hurt our business but because they hurt the American consumer. If the US were more manufacturing friendly I think most bike companies would be happy to manufacture here. However it is very expensive to manufacture in the US and overseas manufacturing is the only real way to offer the American consumer potentially life changing products.”
Not all e-bikes take the form of conventional push-bikes with an incorporated motor, such as the Cytronex bicycles which use a small battery disguised as a water bottle.[44][45] Some are designed to take the appearance of low capacity motorcycles, but smaller in size and consisting of an electric motor rather than a petrol engine. For example, the Sakura e-bike incorporates a 200 W motor found on standard e-bikes, but also includes plastic cladding, front and rear lights, and a speedometer. It is styled as a modern moped, and is often mistaken for one.[citation needed]
If you’re interested in an ebike, you have a couple of options: converting your existing bike or buying an electric version. Abadie says a bike suitable for conversion will have a powerful brake system, wider tires and a strong frame that can hold the motor and battery. He charges $800 to $1,200 to find the right parts and motors for a particular bike.

Because the power is applied through the chain and sprocket, power is typically limited to around 250–500 watts to protect against fast wear on the drivetrain. An electric mid-drive combined with an internal gear hub at the back hub may require care due to the lack of a clutch mechanism to soften the shock to the gears at the moment of re-engagement. A continuously variable transmission or a fully automatic internal gear hub may reduce the shocks due to the viscosity of oils used for liquid coupling instead of the mechanical couplings of the conventional internal gear hubs.


This article first appeared in Electric Bike Report in June of 2013. Since then, we’ve made some changes to our motor selection - our Direct-Drive motors are now all High-Torque 6x9 wound, so they run slower (approximately 15mph at 36v or 20mph at 48v), and our Geared Motors have been replaced by a 500w version, (approximately 20mph at 36v or 28mph at 48v). The Direct-Drive is now our Heavy-Duty motor and the...
Gearing: none (many hub motors, one motor revolution = one wheel revolution), fixed gear reduction for more torque, varies when geared motor drives the chain through the bicycle gears which increases torque about 50% (in low gear) for better hill-climbing and offers better top-end speed (in high gear) than direct drive systems using motors of similar wattage.

Electric bikes or ebikes, widely popular in Europe and China, are steadily making their ascent in the U.S. bike market. Erik Saltvold, founder and owner of ERIK’s Bike Shop, a Midwest-based chain for bike sales and repairs, says the ebike is the fastest-growing specialty bike in the industry. Last October, market research company NPD Group reported that electric bike sales had grown 95 percent in the 12 months ending in July 2017, with sales totaling nearly $65 million.

As a counterbalance to the cute utilitarian bikes above, the Specialized Turbo Levo FSR Comp is a big, bad, and burly mountain bike. With 27.5-inch wheels, massive 2.8-inch tires, 150mm of travel in the front and 135mm of travel in the rear this bike is made to shred. The Specialized 1.3 Rx Trail-Tuned motor is designed specifically for off-road riding and features a double freehweel design that disengages the gear box at top speed to reduce friction while ripping downhill. The low center of gravity and stout parts make this one a relatively nimble handler that is ready for the rowdiest downhills.
×