More powerful pedelecs which are not legally classed as bicycles are dubbed S-Pedelecs (short for Schnell-Pedelecs, i.e. Speedy-Pedelecs) in Germany. These have a motor more powerful than 250 watts and less limited, or unlimited, pedal-assist, i.e. the motor does not stop assisting the rider once 25 km/h has been reached. S-Pedelec class e-bikes are therefore usually classified as mopeds or motorcycles rather than as bicycles and therefore may (depending on the jurisdiction) need to be registered and insured, the rider may need some sort of driver's license (either car or motorcycle) and motorcycle helmets may have to be worn.[14] In the United States, many states have adopted S-Pedelecs into the Class 3 category. Class 3 ebikes are limited to <=750 watts of power and 28 mph.[15]
Both Vintage Electric and Optibike build more expensive electric bicycles in smaller numbers that are geared towards wealthier clientele. By focusing on what some would consider “luxury electric bicycles”, these companies might be better positioned to either absorb the cost of increased tariffs on imported parts such as electric bicycle motors, or find customers with enough expendable income that the higher prices of the final e-bikes wouldn’t be as large of a deterrent.

Riese & Muller’s Nevo line definitely tops my list for commuting electric bikes. These bikes are premium, custom made bikes for a reasonable, middle-of-the-road price. All Riese & Muller bikes are hand made in Germany exactly to your specifications. The Nevo line specifically is incredibly well balanced and keeps riders in a comfortable, upright position. Riders also get a suspension seatpost (either the Cane Creek Thudbuster or Satori Elegance LT), which is a nice compromise between the full suspension Homage line and a complete hardtail.
At speed the E proved a stable and neutral ride, the motor engaged in good time and there was a reasonable amount of assist (the amount of motor assist is adjustable via a Bluetooth app up to 25kmph or 15.5mph). Charging of the in-hub battery is possible via a neat hollow charging bolt on the drive-side of the rear wheel. The Cooper E is one for retro-futurists and people who want others to say, "No way that’s an electric bike!"
China's experience, as the leading e-bike world market, has raised concerns about road traffic safety and several cities have considered banning them from bicycle lanes.[2] As the number of e-bikes increased and more powerful motors are used, capable of reaching up to 30 miles per hour (48 km/h), the number of traffic accidents have risen significantly in China. E-bike riders are more likely than a car driver to be killed or injured in a collision, and because e-bikers use conventional bicycle lanes they mix with slower-moving bicycles and pedestrians, increasing the risk of traffic collisions.[2]
With over 30 years of professional sales experience and a passion for cycling, Brian brings a level of business acumen to E-BikeKit that ensures we’re laying the groundwork for long-term success.Brian is committed to helping make the most informed decisions that will guide the E-BikeKit product and brand in the right direction. “As an eco-friendly consumer and a baby boomer myself I know the value of the electric bike for those in...

And then add in all of the other e-bike parts including motors, batteries, throttles, speed controllers, etc. All of these parts are mass-produced in China. They simply aren’t available in the US and no one is designing them or manufacturing them. The US would likely have to start by reverse engineering the Chinese products and learning how they produce them. How’s that for irony?


What a treat to do business with the folks at Hill Topper. I now have two commuter units one in Idaho and one in Denver my average ride is 25 to 35 miles. I have been riding for about 15 years but being the age of 80 I needed a little help the past few years. I researched electric bikes a few years ago even rode a couple here in Denver but I wanted my own personal look and feel. So about five years ago I found Hill Toppers. What a treat first the units are the best but that is part of the good part the people at Hill Toppers are the very best to work with and enjoy. I had to have a knee replacement last July well thank god for my bike it was the best therapy I could ask for. When in Idaho I get to ride along the Snake river what a treat knowing that I have this unit to help if the wind or rain shows up. When in Denver I cover a lot of area as they have wonderful bike trails all over the area. I ride all of the downtown area and the Cherry Creek dam up and over it takes some effort to get that done but with the help of Hill topper it is a beautiful ride up and overlooking the whole of Colorado. Thank you Andrew,Charles,Sam,Mark.
{HIGH-QUALITY MATERIAL & AFFORDABLE PRICE} :The electric bikes adopts High-strength Carbon Steel Frame, the front fork is made of High-strength Carbon Steel and packed with premium comfort shock absorption.Affordable Direct to Consumer Pricing (Sell directly from factory),Why are our bikes often less than half the price of comparable bikes on the market? Because we sell direct to you, the consumer.We ensuring you're always getting the best deal on your electric bike
If you want it to, an e-bike can replace a car, which is better for good ol' Mother Earth. Weinart says many young professionals are now seeking a "car-free" or "car-lite" lifestyle. In fact, 65 percent of people said replacing car trips was the main reason for getting an e-bike, according to a recent report. Accessories, such as racks, baskets, fenders, and even cargo e-bikes (for toting groceries or kiddos) are all available to make commuting by bike easier and more comfortable.
Have to give a shout out to a Bulls Brose option. They were the first manufacturers I saw integrate the battery into the frame really well, and they’ve continued to improve upon that design. As I mentioned above, I love the wave frame. Super easy to get on and off and it’s got a cool look as well. If you’re not a fan, this bike does come in both a Diamond and step-thru frame.

This article first appeared in Electric Bike Report in June of 2013. Since then, we’ve made some changes to our motor selection - our Direct-Drive motors are now all High-Torque 6x9 wound, so they run slower (approximately 15mph at 36v or 20mph at 48v), and our Geared Motors have been replaced by a 500w version, (approximately 20mph at 36v or 28mph at 48v). The Direct-Drive is now our Heavy-Duty motor and the...
Pedal Assist Electric Bikes, also known as "E-bikes," are bicycles that have an electric motor to assist riders. The motor is powered by a battery and only assists the cyclist when he/she is pedaling. Electric bikes come in many different styles including commuter, recreational, step-thru with low-entry frames, cargo and mountain. They all have one thing in common: e-bikes are very simple to ride – if you can ride a bike you can ride an electric bike!
Range is a key consideration with e-bikes, and is affected by factors such as motor efficiency, battery capacity, efficiency of the driving electronics, aerodynamics, hills and weight of the bike and rider.[36][37] Some manufacturers, such as the Canadian BionX or American Vintage Electric Bikes,[38] have the option of using regenerative braking, the motor acts as a generator to slow the bike down prior to the brake pads engaging.[39] This is useful for extending the range and the life of brake pads and wheel rims. There are also experiments using fuel cells. e.g. the PHB. Some experiments have also been undertaken with super capacitors to supplement or replace batteries for cars and some SUVS. E-bikes developed in Switzerland in the late 1980s for the Tour de Sol solar vehicle race came with solar charging stations but these were later fixed on roofs and connected so as to feed into the electric mains.[40] The bicycles were then charged from the mains, as is common today. While ebike batteries were produced mainly by bigger companies in past, many small to medium companies have started using innovative new methods for creating more durable batteries. State of the art, custom built automated precision CNC spot welding machines[41] created 18650 battery packs[42] are commonly used among Do-it-yourself ebike makers.
"Bargain Buys" Most electric bikes priced less than $600 at big box retailers and on-line are aimed at the kid/teen/toy market. They generally lack the performance and durability that people want and expect. Also, parts and service can be problematic with both big box retailers and on-line vendors. We urge you to invest in a quality e-bike, preferably from a local dealer, that will serve you (and others) for many years. Remember, if it's poorly constructed and you can't get repair parts, it will likely become land-fill material. Save, beg, or borrow the money to get a quality bike or kit.
The eZeeBike has been a successful and sought-after line of e-bikes in Europe that are now available in the United States. Range of 30 miles and top assisted speed of 20 mph is possible with the three standard (non-folding) models. With well-crafted aluminum alloy frames and lithium batteries, these bikes are lighter than other electric bikes. Equipped with 250- and 350-watt silent (gearless) hub motors, eZee bikes come with many accessories as standard equipment. Different models may include: fenders, front shocks, suspension seat tube, Velo cycle computer , integrated front and rear lights, rear luggage rack with spring-loaded bar and integrated bungy chords, chain guard, and foldability.

The Hanebrink all-terrain vehicle's lithium ion 10 amp hour battery (LiFePO4) will give the bike enough juice for about an hour's use on a single charge, which will take three hours. The rear rack could have up to five batteries fitted which will extend the run time to over five hours. The wide aluminum rear rack is otherwise capable of carrying over 100 pounds of cargo.
Electric mountain bikes have garnered a lot of attention for their ability to help riders go higher, further, and faster on the trail. As a result, there have been some impressive new eMTB models to hit the market in recent years, making it easier than ever to head off-road. Our favorite is the Haibike SDURO HardNine, which comes equipped with a 350-watt Bosch Performance CX drive and a 500 watt-hour battery. This gives it a range of up to 70 miles, along with a top speed of 20 mph, which is plenty fast on singletrack.
To be honest, this bike is really designed for city commuters or kids riding around the suburbs. The fact that it’s foldable will let you carry it on the bus, on the train or even on the plane. It’s just not designed for heavy riding, long distances or tough terrains. If you want something sleek and fabulous at a fraction of the cost of most other e-bikes, this baby’s for you.
This bike is named the GSD because with it you can Get Stuff Done. Twenty-inch wheels keep the center of gravity low so heavy payloads—it's rated up to 400lbs—are easy to balance and a short (for a cargo bike) 70-inch wheelbase, similar to a standard single bike, make the GSD easy to maneuver. Designed with the urban commuter in mind, the bike can easily break down to 60 percent of its original size to fit into the back of a car and the rear rack doubles as a stand that allows it to stand upright to minimize space inside tight apartments. Put two child seats on the back and take the family along, or drop the seat and let you kid take the bike out himself—anyone from 4'10" to 6'5" can ride this bike. Last but not least, the GSD gives you the option of adding a second battery to extend your range up to about 150 miles on a single charge.
×