“Second, even if you do make bikes in the US, they will be multiple times more expensive than their overseas counterparts and 99.9% of consumers won’t pay that price. When my shop tried selling a US-made bike next to a Chinese bike, with signage that explained why the US-made bike was more expensive, we couldn’t even sell one. Customers would stand there and talk about how they want American-made goods, then they would buy the Chinese bike.”
The environmental effects involved in recharging the batteries can of course be reduced. The small size of the battery pack on an e-bike, relative to the larger pack used in an electric car, makes them very good candidates for charging via solar power or other renewable energy resources. Sanyo capitalized on this benefit when it set up "solar parking lots", in which e-bike riders can charge their vehicles while parked under photovoltaic panels.
The first functioning electric motor was displayed in the early 19th century, though the device constructed by British scientist Michael Faraday did little more than swirl a wire around a magnet when an electric charge was introduced. Still, the concept proved that electricity could do work. Functional electric motors would follow in many forms after that achievement in 1821. Soon scientists and tinkerers around the world, including visionaries such as Nikola Tesla, were experimenting with all manner of electric motors -- some worked with DC power, others with AC. By the end of the century, myriad electric motors had been produced, capable of exerting enough force with enough reliable control that they were practical for use in myriad applications.
And then add in all of the other e-bike parts including motors, batteries, throttles, speed controllers, etc. All of these parts are mass-produced in China. They simply aren’t available in the US and no one is designing them or manufacturing them. The US would likely have to start by reverse engineering the Chinese products and learning how they produce them. How’s that for irony?
There are two basic categories of electric bike, and their uses don't offer equal crossover value. The first category is essentially a normal bicycle that has been outfitted with an electric motor. These bikes are the same size as a standard bicycle, and handle almost identically, save for the obvious benefit of added motive power thanks to a motor and battery.
The environmental credentials of e-bikes, and electric / human powered hybrids generally, have led some municipal authorities to use them, such as Little Rock, Arkansas with their Wavecrest electric power-assisted bicycles or Cloverdale, California police with Zap e-bikes. China’s e-bike manufacturers, such as Xinri, are now partnering with universities in a bid to improve their technology in line with international environmental standards, backed by the Chinese government who is keen to improve the export potential of the Chinese manufactured e-bikes.
Because the power is applied through the chain and sprocket, power is typically limited to around 250–500 watts to protect against fast wear on the drivetrain. An electric mid-drive combined with an internal gear hub at the back hub may require care due to the lack of a clutch mechanism to soften the shock to the gears at the moment of re-engagement. A continuously variable transmission or a fully automatic internal gear hub may reduce the shocks due to the viscosity of oils used for liquid coupling instead of the mechanical couplings of the conventional internal gear hubs.
You turn it on by pressing the green button on the battery once for low power and twice for high, although to be honest, there is not a lot of difference between them. After that, you just pedal. There are no gears, no chain to muck up your trousers (a motorbike-style carbon fibre belt is used instead) and not that much difference in feeling compared to riding a normal bike.
“At $500 apiece,” he says, “the company would be selling e-bikes at a loss, once they factored in product liability insurance, quality control, regulatory compliance, safety testing, and post-sales service and support. Chinese e-bikes could certainly ‘leak’ into the U.S. market near that cost, be sold as a loss leader, or be marketed directly on eBay, but a fully costed business model could potentially lose up to $250 per bike.”
Over the years our lineup has grown, and as a result, the offering has become more complicated than it needs to be. Specifically, this year we introduced a 500w geared motor option to the lineup and that has created some redundancy. Before outlining changes, we would like to ensure everyone that we will be stocking enough inventory of previously sold parts for a long enough time to ensure all warranties...
But with increased demand and production, as well as technology improvements thanks to advances in the electric car industry, the cost of components like lithium-ion batteries comes down, Weinert explains. Now, e-bikes are on the market as low as around $1,200 (like the Monroe 250 from Schwinn, available in November 2017). Plus, the competition is stiff. “There are more brands producing than there were five years ago, and they all have to be competitive," LaLonde says.
Folding Electric Bikes- These are mostly used when people need to combine different modes of transport. For example, if you need first to take the train or bus, a folding e-bike can be useful to carry along. Also, very short trips are more convenient with these electric bikes since you don’t need to bother tying them up. Typically, these are very light, even with the motor and battery.
The two most common types of hub motors used in electric bicycles are brushed and brushless. Many configurations are available, varying in cost and complexity; direct-drive and geared motor units are both used. An electric power-assist system may be added to almost any pedal cycle using chain drive, belt drive, hub motors or friction drive. BLDC hub motors are a common modern design. The motor is built into the wheel hub itself, and the stator fixed solidly to the axle, and the magnets attached to and rotating with the wheel. The bicycle wheel hub is the motor. The power levels of motors used are influenced by available legal categories and are often, but not always limited to under 750 watts.
Thank you Clean Republic for coming to my rescue when I had a battery issue last year. Under Warranty at 11.5 months, they without hesitation sent me an entire new $355 Battery pack when mine began to fail. I've gotten so much life, miles, and usage out of my Hill Topper from this first one and am about to replace the batteries again from so much more love on them. Seems the hub motor is going to last forever and that's what counts! Thanks guys! :)
The body is made from light and durable aluminum. The handlebar comes with simple controls to let you accelerate, brake, monitor battery life, operate headlights and of course…sound the horn. There’s even an USB point that will let you charge your iPhone or Android on the go. The bike can reach a top speed of 10mph. Feel the wind in your hair as you zoom up and down hills and past all that city traffic…
What a treat to do business with the folks at Hill Topper. I now have two commuter units one in Idaho and one in Denver my average ride is 25 to 35 miles. I have been riding for about 15 years but being the age of 80 I needed a little help the past few years. I researched electric bikes a few years ago even rode a couple here in Denver but I wanted my own personal look and feel. So about five years ago I found Hill Toppers. What a treat first the units are the best but that is part of the good part the people at Hill Toppers are the very best to work with and enjoy. I had to have a knee replacement last July well thank god for my bike it was the best therapy I could ask for. When in Idaho I get to ride along the Snake river what a treat knowing that I have this unit to help if the wind or rain shows up. When in Denver I cover a lot of area as they have wonderful bike trails all over the area. I ride all of the downtown area and the Cherry Creek dam up and over it takes some effort to get that done but with the help of Hill topper it is a beautiful ride up and overlooking the whole of Colorado. Thank you Andrew,Charles,Sam,Mark.
“Even if you deal with the tubing supply chain and consumer retail price tolerance, there is no supply chain here for the cables, shifters, crank sets, chains, saddles, and every other part. It would take decades to set all of this up, but you would first have to get consumers to the point where they will pay $1,800 for the bike that they could get for $400.”
From the tropics to the polar caps, Stark Drive is designed to handle a broad range of temperature conditions with a ruggedized frame and high quality battery pack as well as all terrain tires (standard) or even our fat tire model. Take Stark Drive with you wherever you go. When Designing Stark Drive in Stockholm Sweden we were very conscious of the fact that weather effects battery life on your electric bike so we designed our electric bike with this in mind.
Yuba Bicycles invents, designs and manufactures Utility Bikes and Electric Cargo Bikes to meet today's transportation needs and environmental challenges. They offer maximum utility and comfort whether you are a young Mum dropping kids off to school or an entrepreneur using the bike for business purposes. The Yuba Bicycles line is acclaimed and enjoyed all around the globe for its affordability, ride quality, the quality of the accessories.
As with all these bikes, the assisted speed is capped at 15mph, but unlike some of them, the Gtech eBike City or its identical (spec-wise) sibling the eBike Sport (this just has a standard frame rather than a step-through one) is light and agile enough for you to be able pedal harder without feeling like the weight is fighting you back down to 15mph. You can even, at a push, use it without the motor on flatter roads.
The Benno e-Joy promises to be as fun to play with as it is to look at. Benno says it took inspiration from the timeless style of vintage Italian scooters and classic German cars. Add in the functionality of front and rear cargo racks and the 250w pedal-assist motor and you have a beautiful bike that's ready for anything. Cruise into town for groceries, wander comfortably along a gravel path on 2.35-inch balloon tires, or add the child seat attachment and take your kid along for the ride, and beach-goers will appreciate the surfboard rack. Whatever your cycling pleasure pursuit may be, the e-Joy can be your ticket to fun.