The Soho is one of Coboc’s four single-speed pedal-assist bikes. The bikes are differentiated with finishing kit - handlebar style, bar-tape, saddle and paint finish. With a retro / bespoke styling with Bullhorn bars, Brooks fabric-tape and Cambium saddle and brushed aluminium frame, the Coboc is an e-bike for riders who don’t want to look like they’re riding an e-bike. The ONE Soho is for a rider that doesn’t want gears either.
The G-10 features a top-tube mounted on-off button and ‘set’ button for one of four power modes, all linked to a Groove Go wheel mounted motor via a removable clip-lock battery stashed under the down-tube. Kalkhoff has paired this with a mid-range Shimano Tiagra 1x10 speed drive-train and effective Shimano M396 hydraulic disc brakes. A nice touch is the anti-slip ‘grip-tape’-covered flat pedals, perfect for a bike to be ridden around town without specialist shoes.
A representative for Ancheer, a California-based e-bike company that sells some of the most affordable e-bikes in the US, expressed dismay over the tariffs in an interview with Electrek. Ancheer will regrettably be raising prices on their electric bicycles, but intends to try to absorb some of the cost to avoid passing on the entire 25% tariff to their customers.
All three road bikes receive their power from Yamaha’s PWSeries SE motor that comes with four levels of support: ECO+, ECO, STANDARD, and HIGH. The mid-drive motor supplies a maximum of 70 Nm (52 ft-lbs) of torque and cadence support up to 110 rpm. The motors are designed to provide assistance up to 20 mph (32 km/h). Any faster, and it’s all you providing the power.
Designed for the same maneuverability as a non-electric bike, this roughly $3,000 model designed for the city can handle hills and distance. Using a Bosch motor for 100-mile cycling on flat or hilly terrain and a lightweight aluminum frame, the Dutch-made Gazelle model aims for a “sporty posture” and “precise cycling performance” in a robust offering.
Although ebikes are easier to use in some instances, such as climbing hills, there are safety concerns. Because the bikes are heavier than traditional bikes, balance can be a problem. And, of course, ebikes allow people to cycle at higher speeds than usual. “A normal rider will average between 12 to 15 mph, where an ebike rider will average between 15 to 20 mph,” Abadie says. An increase in the number of deaths of elderly male ebike riders in the Netherlands has been attributed to their overconfidence in being able to ride at high speeds and to mount and dismount the bikes.
The Stromer is tailored for riders of all types and skill levels. The patented "dual power system" allows for power-on-demand riding (limited to no pedaling), with a top speed of 20 mph and a range of up to 20 miles. Feel like pedaling? Just switch to pedal-assist mode and let the state-of-the-art torque sensor augment your pedaling efforts with motor assistance. Pedal-assist mode allows for 45+ mile range. Charging is easy with their patented removable battery system. Simply unlock the internal battery storage case on the frame, remove the battery, and charge up with any 115V power outlet (onboard charging is also available).
I tested the Sduro 8.0 towards the end of last year (there's a new range out for 2018) and was surprised by its nimbleness. You expect e-bikes to be less maneuverable than their acoustic predecessors, but, pelting down some bespoke forest paths near Pedal & Spoke in the Surrey hills, I found I completely forgot that there was a box of electronic EPO on my frame. Partly, that's because the battery is cleverly integrated into the frame to decrease drag; mostly, it's because the suspension is soft and the steering nimble, much like a normal mountain bike.

Gearing: none (many hub motors, one motor revolution = one wheel revolution), fixed gear reduction for more torque, varies when geared motor drives the chain through the bicycle gears which increases torque about 50% (in low gear) for better hill-climbing and offers better top-end speed (in high gear) than direct drive systems using motors of similar wattage.
Those buyers aren’t likely to get a major workout. Researchers from the University of Tennessee found in a study of walkers, ebike riders and traditional bike riders that those who completed a 4.43-kilometer hilly route on an ebike used 22 percent less energy than traditional bikers and 64 percent less than walkers, most likely because the ebikers got to the finish line faster than the others. But perks included higher levels of enjoyment and no need for a shower when they were done.
Electric Bike Technologies has been delivering the best experience in electric bike kit conversion since the company was founded in 2008. Driven by a respected founder and a team of dedicated electric bike enthusiasts, the E-BikeKit™ electric bike conversion systems have been sold worldwide to thousands of electric bike riders and fostered partnerships with some of the best brands in the bicycle industry. The company has been featured on NBC’s Good Morning America and the E-BikeKit system is the only electric bike kit system distributed by J&B Importers, the largest bicycle distributor in the United States.
It’s only available in one frame size but the low top tube, adjustable seat and more upright riding position make it comfortable for people of different heights. The low-ride cargo rack and smaller (20-inch) rear wheel lower the center of gravity making the bike easier to maneuver. This is a workhorse of a bike that could easily replace a second car for most day-to-day necessities.

A 2008 market survey showed that the average distance traveled in the Netherlands by commuters on a standard bicycle is 6.3 kilometres (3.9 mi) while with an e-bike this distance increases to 9.8 kilometres (6.1 mi).[79] This survey also showed that e-bike ownership is particularly popular among people aged 65 and over, but limited among commuters. The e-bike is used in particular for recreational bicycle trips, shopping and errands.[79]

All three road bikes receive their power from Yamaha’s PWSeries SE motor that comes with four levels of support: ECO+, ECO, STANDARD, and HIGH. The mid-drive motor supplies a maximum of 70 Nm (52 ft-lbs) of torque and cadence support up to 110 rpm. The motors are designed to provide assistance up to 20 mph (32 km/h). Any faster, and it’s all you providing the power.


Gearing: none (many hub motors, one motor revolution = one wheel revolution), fixed gear reduction for more torque, varies when geared motor drives the chain through the bicycle gears which increases torque about 50% (in low gear) for better hill-climbing and offers better top-end speed (in high gear) than direct drive systems using motors of similar wattage.
Controllers for brushless motors: E-bikes require high initial torque and therefore models that use brushless motors typically have Hall sensor commutation for speed and angle measurement. An electronic controller provides assistance as a function of the sensor inputs, the vehicle speed and the required force. The controllers generally allow input by means of potentiometer or Hall Effect twist grip (or thumb-operated lever throttle), closed-loop speed control for precise speed regulation, protection logic for over-voltage, over-current and thermal protection. Bikes with a pedal assist function typically have a disc on the crank shaft featuring a ring of magnets coupled with a Hall sensor giving rise to a series of pulses, the frequency of which is proportional to pedaling speed. The controller uses pulse width modulation to regulate the power to the motor. Sometimes support is provided for regenerative braking but infrequent braking and the low mass of bicycles limits recovered energy. An implementation is described in an application note for a 200 W, 24 V Brushless DC (BLDC) motor.[43]
“Second, even if you do make bikes in the US, they will be multiple times more expensive than their overseas counterparts and 99.9% of consumers won’t pay that price. When my shop tried selling a US-made bike next to a Chinese bike, with signage that explained why the US-made bike was more expensive, we couldn’t even sell one. Customers would stand there and talk about how they want American-made goods, then they would buy the Chinese bike.”

Whether the terrain is flat or hilly impacts the distance you can travel, as does the weight of the bike, your own weight, the gearing available on the bike, and how much juice you give it. We suggest that a distance of 10 to 20 miles is a realistic expectation. Of course, if you're prepared to do at least some pedaling, you can extend that dramatically.

At the end of the day, you'll have a ton of fun riding one. “There’s that nostalgic feeling that kicks in whenever you’re on one, that feeling you got when you started riding as a kid," LaLonde says. You might have to get on one to understand, but there are few things more smile-inducing than floating up a steep hill with little effort, Mary Poppins-style.
We found the Groove motor a little laggy in engagement, with often almost a full rotation of the cranks before the assist engaged - compared with the Gazelle and Vanmoof, the pick-up was frustrating. Putting our issues with the assist to one side, we couldn’t fault the aesthetic: we loves the semi-mixte frame style, a practical non-gender specific design.
The Riese & Müller Load Touring HS is billed as “the ultimate minivan of e-bikes,” and it holds up to that claim. With a low center of gravity (aided by the 20-inch front and 26-inch rear wheels) the Load is easy to handle. Tektro hydraulic disc brakes add control, and front and rear suspension provide comfort. The Bosch motor offers an assist up to 275 percent of your effort until you hit 28mph, when it cuts out. The massive cargo space (with side walls) can carry and the two 500Wh batteries give you 12 hours or more of range at full power. It’s capable of toting up to 220 pounds of pets, people, and less-animate cargo. R&M also sells a double child seat for kids up to age 6 and a child-seat fastener for your youngest passengers.
×