E-bikes use rechargeable batteries, electric motors and some form of control. Battery systems in use include sealed lead-acid (SLA), nickel-cadmium (NiCad), nickel-metal hydride (NiMH) or lithium-ion polymer (Li-ion). Batteries vary according to the voltage, total charge capacity (amp hours), weight, the number of charging cycles before performance degrades, and ability to handle over-voltage charging conditions. The energy costs of operating e-bikes are small, but there can be considerable battery replacement costs. The lifespan of a battery pack varies depending on the type of usage. Shallow discharge/recharge cycles will help extend the overall battery life.
Installing an electric bike kit is easy to do, can be done in just an hour or so and can last for many years if done right initially. Deciding on the right electric bike conversion kit, the one that suits your riding style and your bike best, is the most important decision you’ll make during this process. Good news... you’ve come to the right place!
The two most common types of hub motors used in electric bicycles are brushed and brushless. Many configurations are available, varying in cost and complexity; direct-drive and geared motor units are both used. An electric power-assist system may be added to almost any pedal cycle using chain drive, belt drive, hub motors or friction drive. BLDC hub motors are a common modern design. The motor is built into the wheel hub itself, and the stator fixed solidly to the axle, and the magnets attached to and rotating with the wheel. The bicycle wheel hub is the motor. The power levels of motors used are influenced by available legal categories and are often, but not always limited to under 750 watts.
The G-10 features a top-tube mounted on-off button and ‘set’ button for one of four power modes, all linked to a Groove Go wheel mounted motor via a removable clip-lock battery stashed under the down-tube. Kalkhoff has paired this with a mid-range Shimano Tiagra 1x10 speed drive-train and effective Shimano M396 hydraulic disc brakes. A nice touch is the anti-slip ‘grip-tape’-covered flat pedals, perfect for a bike to be ridden around town without specialist shoes.
The Riese & Müller Load Touring HS is billed as “the ultimate minivan of e-bikes,” and it holds up to that claim. With a low center of gravity (aided by the 20-inch front and 26-inch rear wheels) the Load is easy to handle. Tektro hydraulic disc brakes add control, and front and rear suspension provide comfort. The Bosch motor offers an assist up to 275 percent of your effort until you hit 28mph, when it cuts out. The massive cargo space (with side walls) can carry and the two 500Wh batteries give you 12 hours or more of range at full power. It’s capable of toting up to 220 pounds of pets, people, and less-animate cargo. R&M also sells a double child seat for kids up to age 6 and a child-seat fastener for your youngest passengers.
The final thing I love about this the Riese & Müller Delite GT Touring is the plus size tires. If you’ve ever been on a bike for the majority of the day, you know that any little bit of cushioning can make all the difference. Riese & Müller have provided this extra cushion in their tires. These tires are also excellent for wet weather and some light off-roading if you want to take a shortcut.
You should be extra aware about your local regulations as in many countries an L1e-A certified bike needs to be registered and insured (be sure to consult your local laws and rules) and with registration comes the security that the bike can be tracked if it is stolen or misplaced. This approval that we have received is European Union wide and even those countries that are not part of the EU but rather EEA do adopt similar regulations in order to keep the market common but you will need to consult with your authorities. We will detail more about the registration process in an upcoming blog post but if you have any questions you can email us and we will respond in kind.
China's experience, as the leading e-bike world market, has raised concerns about road traffic safety and several cities have considered banning them from bicycle lanes. As the number of e-bikes increased and more powerful motors are used, capable of reaching up to 30 miles per hour (48 km/h), the number of traffic accidents have risen significantly in China. E-bike riders are more likely than a car driver to be killed or injured in a collision, and because e-bikers use conventional bicycle lanes they mix with slower-moving bicycles and pedestrians, increasing the risk of traffic collisions.
A representative for Ancheer, a California-based e-bike company that sells some of the most affordable e-bikes in the US, expressed dismay over the tariffs in an interview with Electrek. Ancheer will regrettably be raising prices on their electric bicycles, but intends to try to absorb some of the cost to avoid passing on the entire 25% tariff to their customers.
Added help on the hills: An extra boost on the hills or when cycling into a headwind is probably the first thing most people think about when they’re considering an electric bike. If you live in a valley where the only way out is up, then having a bit of motor assistance may mean the difference between a happy cycling experience and not cycling at all.
The final major consideration is what type of riding you will be doing. Are you going on an off-road adventure through the mountains? You’ll want a very different electric bike than you would need if you’re riding on paved roads the whole time. Most bike tours are going to be on paved roads, but you should always research the area in detail during your planning process.
The Dew-E packs functionality and fun into a rather traditional and conservative package. Front and rear fenders, integrated Busch & Müller front and rear lights, and a built-in Abus wheel lock make this a very practical commuter bike. An 11-34t 9-speed cassette and 1.75-inch tires provide versatility: You’ll stay smooth over rough city streets and zip down gravel bike paths with confidence. Front and rear rack mounts also give you the chance to outfit this bike for carrying more cargo or supplies for a longer day on the bike. Whichever way you think you’ll be riding an e-bike, this bike deserves a second look.
It’s impressive just how traditional a finish they’ve achieved for a pedal-assist bike, especially considering the motor uses Kinetic Energy Recovery to charge itself (like F1 Cars). Firing up the motor is achieved by back-pedaling three times (while travelling over 8mph). It’s a neat idea, and a clever way of doing away with those cables and switches, but in reality it’s fiddly. Riding in the city we occasionally felt ridiculous on a busy street pedaling backward rather than forward to kick off the assist. It’s also a chore getting the bike to speed and going through the motion to activate in tight spaces such as underground garages or on an incline.