Certainly not for the entry-level e-bike buyer, those who need to strap cargo to their back now have a new option with the Riese & Muller Load option, with full cargo space on the front of the bike. While over $6,000, the full-suspension bike has adjustability to allow for differing loads. Safety features include LED headlights and premium components abound.
Back to the bike. I’ve gotta be honest, it doesn’t look half bad. The battery fits into the downtube, which is way better than those crazy brackets you see on cheap ebikes. The welds are also smoothed over, like an old Aluminum Cannondale. The drivetrain is a mix of parts, with Shimano Altus in the rear. Altus is a mountain bike groupset, but on the very low end.

The Soho is one of Coboc’s four single-speed pedal-assist bikes. The bikes are differentiated with finishing kit - handlebar style, bar-tape, saddle and paint finish. With a retro / bespoke styling with Bullhorn bars, Brooks fabric-tape and Cambium saddle and brushed aluminium frame, the Coboc is an e-bike for riders who don’t want to look like they’re riding an e-bike. The ONE Soho is for a rider that doesn’t want gears either.
For those looking to hit the trails instead of the pavement, Yamaha has you covered with their new YDX-TORC electric-assist bicycle, which is powered by a souped-up version of their mid drive known as the Yamaha PW-X center drive motor system, which the company claims offers the extra power needed for more adventure and exploration on the trails, including a fifth power assist setting. As a more powerful e-bike, the YDX-TORC also demands a higher price of $3,499.
Probably the most important thing to consider when researching the best electric touring bike for you is how far you need your bike to take you every day. Be realistic about this. If you purchase a lower end electric bike, don’t be surprised when it only takes you half as far as you want to go. Think about whether or not there are going to be opportunities to charge your battery in the middle of your daily riding. If not, it might be a good idea to buy an extra battery.
Not all e-bikes take the form of conventional push-bikes with an incorporated motor, such as the Cytronex bicycles which use a small battery disguised as a water bottle.[44][45] Some are designed to take the appearance of low capacity motorcycles, but smaller in size and consisting of an electric motor rather than a petrol engine. For example, the Sakura e-bike incorporates a 200 W motor found on standard e-bikes, but also includes plastic cladding, front and rear lights, and a speedometer. It is styled as a modern moped, and is often mistaken for one.[citation needed]
The two most common types of hub motors used in electric bicycles are brushed and brushless. Many configurations are available, varying in cost and complexity; direct-drive and geared motor units are both used. An electric power-assist system may be added to almost any pedal cycle using chain drive, belt drive, hub motors or friction drive. BLDC hub motors are a common modern design. The motor is built into the wheel hub itself, and the stator fixed solidly to the axle, and the magnets attached to and rotating with the wheel. The bicycle wheel hub is the motor. The power levels of motors used are influenced by available legal categories and are often, but not always limited to under 750 watts.

It will be of little surprise to learn that the Hanebrink all-terrain vehicle was designed by six time Mountain Bike national class champion and former U.S. National Team member Dan Hanebrink. It's based on 1993's Extreme Terrain fat tire pedal bike and is made to order at the Fortune Hanebrink workshop at Big Bear Lake, California. Echoing the philosophy of many electric assist bicycle makers, Hanebrink says: "We are not trying to replace standard bicycles, we want to replace cars and trucks."
Dan has a lifetime of experience with bicycles and is a hands-on expert when it comes to converting bicycle to electric.  Dan is the person you will most likely converse with on Live Chat. He can assist with diagnosing any issues and he is more than happy to enlighten those who ask on almost any topic related to electric bikes. Dan has been riding electric bikes almost daily since 2008...
In a friction drive motor, a small, solid wheel rotates against the side of the tire in order to drive it. The first motorcycles used the same concept, with a motor mounted above the front wheel. The problem is that the drive rubs at the side of the tire. It's inefficient, and it quickly wears the sidewall away. Tires need to be replaced every couple hundred miles. For this reason, you'll seldom see electric bikes with this type of drive anymore.
On a trip to Palo Alto last year, we had the chance to ride Specialized’s pedal-assisted Turbo Vado and the model is still our favorite ebike on the market. Utilizing a 350-watt motor and 604-watt-hour lithium-ion battery, the Turbo Vado is capable of traveling a whopping 80 miles on a single charge, which should be more than enough for any daily commute with plenty of miles left over.
Rachel L. Davis is an avid bicyclist. But as a working mother of two, with a third child on the way, she doesn’t have time for long bike rides. “In my world, getting my exercise has to be part of my daily life,” says Davis, 36, who owns a marketing strategy company based in Washington. “I live in a hilly part of D.C., and as I’ve become more pregnant, more tired with more children, I don’t have as much energy to be biking 40 miles or biking to Alexandria.”
In a parallel hybrid motorized bicycle, such as the aforementioned 1897 invention by Hosea W. Libbey, human and motor inputs are mechanically coupled either in the bottom bracket, the rear wheel, or the front wheel, whereas in a (mechanical) series hybrid cycle, the human and motor inputs are coupled through differential gearing. In an (electronic) series hybrid cycle, human power is converted into electricity and is fed directly into the motor and mostly additional electricity is supplied from a battery.
The F1-trained engineers at William Advanced Engineering assisted with the electrical parts and the result is a 250W motor that provides pedal assistance via the front hub – which is a highly unusual approach –  drawing power from a 300Wh battery pack that sits in a bag and goes on the front where the Brompton luggage rack would normally sit. You can also opt for a larger bag that holds both the battery and your spare suit or laptop or whatever. 
Incorporating a wide variety of drive system, control and battery technologies across their product line, Currie provides good bang-for-the-buck across a wide price range. EZIP bikes and scooters carry a six-month warranty and IZIP bikes carry a two-year warranty. For additional details and to view the entire range of products, visit the Currie Tech (Now IZIP website (http://www.izipusa.com/ ).
What a treat to do business with the folks at Hill Topper. I now have two commuter units one in Idaho and one in Denver my average ride is 25 to 35 miles. I have been riding for about 15 years but being the age of 80 I needed a little help the past few years. I researched electric bikes a few years ago even rode a couple here in Denver but I wanted my own personal look and feel. So about five years ago I found Hill Toppers. What a treat first the units are the best but that is part of the good part the people at Hill Toppers are the very best to work with and enjoy. I had to have a knee replacement last July well thank god for my bike it was the best therapy I could ask for. When in Idaho I get to ride along the Snake river what a treat knowing that I have this unit to help if the wind or rain shows up. When in Denver I cover a lot of area as they have wonderful bike trails all over the area. I ride all of the downtown area and the Cherry Creek dam up and over it takes some effort to get that done but with the help of Hill topper it is a beautiful ride up and overlooking the whole of Colorado. Thank you Andrew,Charles,Sam,Mark.
We spent 45 hours on research, videography, and editing, to review the top choices for this wiki. With rechargeable battery-powered pedaling assistance, electric bicycles offer an increasingly viable alternative to fossil-fueled commuting, and e-bikes enable riders of various abilities to extend their range. But the street-legality of these hybrid machines remains a contentious issue, so be sure to check current state and local laws governing their operation before you hit the road. When users buy our independently chosen editorial picks, we may earn commissions to support our work. Skip to the best electric bike on Amazon.
On the other end of the pricing spectrum (although not as high-end as possible) falls the Riese & Muller lines. The Nevo line, which features a Bosch motor, hydraulic disc brakes and speeds up to 28 mph also has a roughly $5,000 sticker (a variety of models allows for a cheaper price). Using a carbon belt and Nuvinci grip shifter, maintenance worries lessen. The German-made premium models are hand made to specifications and comfort reigns supreme.
Our job is to make sure you enjoy your EVELO for many years to come. That’s why they are backed by a 4-year/20,000-mile warranty – double the industry average. If a problem comes up, you are just one call away from our U.S.-based customer service. Combined with our network of partner bike shops around the country for on-the-ground support, you are covered for anything a bike path can throw at you.
The two most common types of hub motors used in electric bicycles are brushed and brushless. Many configurations are available, varying in cost and complexity; direct-drive and geared motor units are both used. An electric power-assist system may be added to almost any pedal cycle using chain drive, belt drive, hub motors or friction drive. BLDC hub motors are a common modern design. The motor is built into the wheel hub itself, and the stator fixed solidly to the axle, and the magnets attached to and rotating with the wheel. The bicycle wheel hub is the motor. The power levels of motors used are influenced by available legal categories and are often, but not always limited to under 750 watts.

In a parallel hybrid motorized bicycle, such as the aforementioned 1897 invention by Hosea W. Libbey, human and motor inputs are mechanically coupled either in the bottom bracket, the rear wheel, or the front wheel, whereas in a (mechanical) series hybrid cycle, the human and motor inputs are coupled through differential gearing. In an (electronic) series hybrid cycle, human power is converted into electricity and is fed directly into the motor and mostly additional electricity is supplied from a battery.
To be honest, this bike is really designed for city commuters or kids riding around the suburbs. The fact that it’s foldable will let you carry it on the bus, on the train or even on the plane. It’s just not designed for heavy riding, long distances or tough terrains. If you want something sleek and fabulous at a fraction of the cost of most other e-bikes, this baby’s for you.
FRAME GEOMETRY  EcoBike electric bikes have been specially designed with the daily commuter in mind. The frame is constructed from a high-strength, lightweight 6061 aluminum alloy that maximizes safety and durability.  The enhanced frame design features comfort ergo-geometry that is more upright than a traditional mountain or road bike.  Every EcoBike electric bike is outfitted with suspension on both front forks (except Vatavio) and seat post to deliver a smoother ride. 

After suffering a back injury and returning home as a disabled combat veteran, Chris found himself unable to exercise the way he had in the past. It was particularly discouraging to be kept from riding his beloved bicycles. Rather than dwell on his misfortune, he decided to search for viable alternatives. It wasn’t long before he settled on his first electric-assisted bike. His passion for bicycles was reinvigorated and he realized he had to share it with the world.


Shell Eco-Marathon Americas Competition 2015 1st and 2nd Place Winners Both Used an Electric Bike Technologies Hub Motor! The Mater Dei Supermileage 3 Team of Mater Dei High School, in Evansville, Ind., took the top spot in the Battery-Electric Prototype category. The team built a vehicle using an electric bike motor from Electric Bike Technologies USA and won the electric plug in class at the 2012, 2013, 2014 and 2015 Shell Eco-Marathon Americas. They...
This bike impressed me right when I saw it. I love that Haibike offers spec-heavy options with the Yamaha PW system. I think the PW system gets a bad rep sometimes for being less powerful than the Bosch, but to be totally honest not everybody needs the power of a Bosch system. Haibike makes up for the lower torque of the PW system by offering a premium Shimano Deore XT drivetrain with 20 speeds. This is great for riders who want to stay in the action a bit more, but still not arrive sweaty and out of breath.

Both land management regulators and mountain bike trail access advocates have argued for bans of electric bicycles on outdoor trails that are accessible to mountain bikes, citing potential safety hazards as well as the potential for electric bikes to damage trails. A study conducted by the International Mountain Bicycling Association, however, found that the physical impacts of low-powered pedal-assist electric mountain bikes may be similar to traditional mountain bikes.[68]
Shell Eco-Marathon Americas Competition 2014 1st and 2nd Place Winners Both Used an Electric Bike Technologies Hub Motor! The Mater Dei Supermileage Team of Mater Dei High School, in Evansville, Ind., took the top spot in the Prototype category. The team built a vehicle using an electric bike motor from Electric Bike Technologies USA and won the electric plug in class at the 2012 Shell Eco Marathon Americas.  They raised the...
The Ancheer Power Plus can be ridden in pedal-assist mode or fully electric. The removable battery can be charged on or off the frame in 4-6 hours and you’ll get up to 31 miles from a single charge (15 miles if you don’t want to pedal). It’s a great bike for short commutes and light off-roading, though if you’re tall, you may find the one-size-fits-all approach doesn’t fit you.
But this bike isn’t just about the accessories. The powerful 48V 13Ah battery will allow you to pedal for longer, with some riders getting over 100 miles from one charge. The bike can be ridden as pedal-assist or throttle only and it’s equipped with full suspension and puncture-free Kenda tires. It folds up neatly to fit into the boot of a car or for commuting, though at 57 pounds, it’s heavy to cart around. A great value-for-money commuting bike with lots of features.

In the 1890s, electric bicycles were documented within various U.S. patents. For example, on 31 December 1895, Ogden Bolton Jr. was granted U.S. Patent 552,271 for a battery-powered bicycle with "6-pole brush-and-commutator direct current (DC) hub motor mounted in the rear wheel". There were no gears and the motor could draw up to 100 amperes (A) from a 10-volt battery.[5]


As far as battery life goes, e-bikes get their juice from a rechargeable battery usually located on or integrated into the frame, and many are removable, so you can power up wherever it’s convenient. The length of your ride and how often you use the bike will determine how frequently you have to charge up. “An e-bike battery can last anywhere from 15 to 60 miles depending on the terrain, how much assist you select, and the rider’s weight, among other factors,” says Jonathan Weinert, North American sales and marketing manager for Bosch eBike Systems. “With a dual battery [like the one Bosch has], you can double that range [around 20 to 120 miles], so it’s very feasible to commute for a week without charging.”
As with all these bikes, the assisted speed is capped at 15mph, but unlike some of them, the Gtech eBike City or its identical (spec-wise) sibling the eBike Sport (this just has a standard frame rather than a step-through one) is light and agile enough for you to be able pedal harder without feeling like the weight is fighting you back down to 15mph. You can even, at a push, use it without the motor on flatter roads.
Irvine, Calif. – As eBikes transform into a "lifestyle product," smart aesthetics and attractive design play an increasingly important role. That’s why Bosch eBike Systems is setting the pace: for Model Year 2018, presenting the PowerTube 500, a battery which can be integrated into the frame of the bicycle. The PowerTube 500 combines modern design with first class Bosch technology for eBikers who prefer a clean and timeless look.
Range is a key consideration with e-bikes, and is affected by factors such as motor efficiency, battery capacity, efficiency of the driving electronics, aerodynamics, hills and weight of the bike and rider.[36][37] Some manufacturers, such as the Canadian BionX or American Vintage Electric Bikes,[38] have the option of using regenerative braking, the motor acts as a generator to slow the bike down prior to the brake pads engaging.[39] This is useful for extending the range and the life of brake pads and wheel rims. There are also experiments using fuel cells. e.g. the PHB. Some experiments have also been undertaken with super capacitors to supplement or replace batteries for cars and some SUVS. E-bikes developed in Switzerland in the late 1980s for the Tour de Sol solar vehicle race came with solar charging stations but these were later fixed on roofs and connected so as to feed into the electric mains.[40] The bicycles were then charged from the mains, as is common today. While ebike batteries were produced mainly by bigger companies in past, many small to medium companies have started using innovative new methods for creating more durable batteries. State of the art, custom built automated precision CNC spot welding machines[41] created 18650 battery packs[42] are commonly used among Do-it-yourself ebike makers.
The second type of electric bike is a much smaller, often foldable unit designed for convenient urban (or suburban) commuting and for easy storage in minimal space. These compact electric bikes are perfect for trips of a few miles, and many are small and lightweight enough to be carried onto trains or buses, allowing their rider to make use of multiple types of transportation in a single trip, and to store their bike in a closet or even under a desk at work, at school, or at home.
As with all these bikes, the assisted speed is capped at 15mph, but unlike some of them, the Gtech eBike City or its identical (spec-wise) sibling the eBike Sport (this just has a standard frame rather than a step-through one) is light and agile enough for you to be able pedal harder without feeling like the weight is fighting you back down to 15mph. You can even, at a push, use it without the motor on flatter roads.
Both Vintage Electric and Optibike build more expensive electric bicycles in smaller numbers that are geared towards wealthier clientele. By focusing on what some would consider “luxury electric bicycles”, these companies might be better positioned to either absorb the cost of increased tariffs on imported parts such as electric bicycle motors, or find customers with enough expendable income that the higher prices of the final e-bikes wouldn’t be as large of a deterrent.
Should an e-bike actually look like an e-bike? Vanmoof think so. With a design and engineering sensibility that’s more Silicon Valley startup than heritage bike brand, Vanmoof is probably the most WIRED of the bikes on test. And the Electrified S has a host of features to prove it. The Bluetooth/proximity activated e-lock (with tamper sensor) that’s built into the frame is a clever innovation, although we're not sure this would be enough theft protection for inner city areas, (where the Vanmoof’s striking design stands out like a jewel on the bike rack). However, for €7 a month, if your bike is stolen, Vanmoof will track down your bike – or replace your bike with a model of the same age if they can’t retrieve it.
This bike is designed for quick handling and high speeds, and not for comfort per se. The Focus is all about form following function. This is both good and bad: you have a bike that is sleek, powerful and nimble, but you also are going to be crouched over the front wheel for better control, gripping no-nonsense grips and riding a saddle meant for performance, not cruising.
China has experienced an explosive growth of sales of non-assisted e-bikes including scooter type, with annual sales jumping from 56,000 units in 1998 to over 21 million in 2008,[72] and reaching an estimated fleet of 120 million e-bikes in early 2010.[2][73] This boom was triggered by Chinese local governments' efforts to restrict motorcycles in city centers to avoid traffic disruption and accidents. By late 2009 motorcycles are banned or restricted in over ninety major Chinese cities.[72] Users began replacing traditional bicycles and motorcycles and e-bike became an alternative to commuting by car.[2] Nevertheless, road safety concerns continue as around 2,500 e-bike related deaths were registered in 2007.[73] By late 2009 ten cities had also banned or imposed restrictions on e-bikes on the same grounds as motorcycles. Among these cities were Guangzhou, Shenzhen, Changsha, Foshan, Changzhou, and Dongguang.[72][73]
The Liv Amiti-E+2 is a low-priced but highly versatile e-bike. It’s just as much at home on the pavement as it is on bike paths and rail trails. But don't feel constrained to groomed paths. Front suspension and 42mm-wide tires mean you can take on off-road detour on your way home from work. Speaking of work, this e-bike makes a great commuter thanks to rack and fender mounts and integrated lights for riding after dark. Internal cable routing and a nicely integrated battery make for clean lines and 9-speed shifters give you plenty of gearing options for whichever type of terrain you decide to tackle. This do-everything bike is great option if you’re riding includes a little bit of this and a little bit of that.
×